John,
do this:
showmount -e
See what it shows as your export list.
My guess is that you haven't changed the /etc/exports file.
If you do need to make a change to your /etc/exports file, make
sure you run: exportfs -ra
Also, double check your /etc/dhcpd.conf file, make sure you've
updated the root-path entry.
Jim McQuillan
[EMAIL PROTECTED]
On Thu, 11 Sep 2003, Clay, John wrote:
> I had a perfectly good ltsp system and then I did two things:
>
> * Upgraded Evo to V1.4 (uses gdm)
> * Changed our entire network numbering scheme
>
> The network is fine, all of our Win Boxes are OK and the LTSP server is
> performing it's DHCP duties properly. I can log on at the server, run
> Xfree86 and do everything I used to do. I believe I made all the necessary
> changes to the LTSP server but when I boot a thin terminal I end up with a
> kernel panic. The first sign of trouble is here:
>
> eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
> 207.155.183.72: No such file or directory (I have no idea where this IP
> address comes from)
> Mounting root filesystem: /opt/ltsp/i386 from 10.4.1.21 (10.4.1.0 is the new
> network and .21 is the LTSP server)
> Mount failed - Reason given by server - Permission denied.
>
> The permissions for /opt/ltsp/i386 and it's contents are: rwsr_xr_x
>
> Any ideas?
>
> John Clay
> Tallahassee, FL
> USA
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.freenode.net
>
--
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
