On Wed, Sep 17, 2003 at 10:30:34AM +0200, Hofer Konrad wrote:
> Hi,
>
> is it possible to specify a range of ip addresses for the workstations
> instead of
> putting in each workstations mac address?
man dhcpd.conf
If clients on a subnet are to be assigned addresses dynamically, a range
declaration must appear within the subnet declaration.
subnet 204.254.239.32 netmask 255.255.255.224 {
subnet-specific parameters...
range 204.254.239.42 204.254.239.62;
}
>
> THanks very much.
>
> REgards,
>
> Konrad
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.freenode.net
--
Maurice Libes
Tel : +33 (04) 91 82 93 25 Centre d'Oceanologie de Marseille
Fax : +33 (04) 91 82 65 48 UMS2196 CNRS- Campus de Luminy, Case 901
mailto:[EMAIL PROTECTED] F-13288 Marseille cedex 9
Annuaire : http://annuaire.univ-aix.fr/showuser.php?uid=libes
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
