Dear Shan, No problem at all ! That's why we're here for !
Well... I saw Mr. David Jhonson's reply and it make sense to me... have you checked out this ? "When you configure the printer in OpenOffice, make sure you have "-oraw" on the lp line. Otherwise, OpenOffice and your print spooler will BOTH try to convert the document to postscript and you get odd effects (like printing raw postscript or blank pages). " Regards, Junior Em Sex 19 Set 2003 02:58, Shanmugasundaram Doraisamy escreveu: > Dear Arecio, > Thank you for your reply. Yes I did configure the printer in printer > setup in Open Office. I used the Generic Printer. Does any one else > have the same problem. > > Regards, > > Shan. > > On Thu, 2003-09-18 at 17:35, Ar�cio Junior wrote: > > Have you configured the printer on OpenOffice ? > > > > Jr. > > > > Em Qui 18 Set 2003 02:37, Shanmugasundaram Doraisamy escreveu: > > > Hi Everybody! > > > I had posted this message earlier to the list but did not find it > > > on the digest. I guess something went wrong some where. Any ways, the > > > problem I am having is : > > > > > > We have Redhat 7.3 installed on the server and running ltsp 3.0. We > > > have printers connected to the nodes and configured as JetDirect > > > Printers. When we print from our ERP it prints fine. But when we try > > > to print from Open Office we only get blank pages. Please advise on > > > the action to be taken. Thanking you, > > > > > > Shan. -- Ar�cio Junior LinkSoftware Solu��es em Conectividade www.linksoftware.com.br (19) 3212-1919 / (19) 9138-4878 ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
