Hi
I've read a lot of conversations on this list but have had no luck as yet.
I boot my workstations from the HDD....
1. From LILO running Linux OS and
2. From .COM files in autoexec.bat running the Windows OS
I've enabled IDE hard disk detection
MODULE_01 = ide-disk
RUNLEVEL = 3
And I'm able to mkdir /mnt/hda1 and mount /dev/hda1 /mnt/hda1
I've also created an exports file in /opt/ltsp/i386/etc folder to say:
/ 192.168.50.0/255.255.255.0(ro,no_root_squash)
But when I try to mount the system
mount -t nfs 192.168.50.193:/ vin
it says:
mount: RPC: Program not registered
How do I go about accessing the data on the local disk?
I'm a bit lost.
Regards
Rishi
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
