LTSP 4.0 installed on RH 8.0
When booting a thin terminal things go well until I get the following
error messages:
1) "Cannot write to remote file handle on 10.4.1.26:514"
* I added "syslog 514/udp" to /etc/services
* In /etc/rc.d/init.d/syslog I added the " -r" as follows:
else
SYSLOGD_OPTIONS="-m 0 -r"
KLOGD_OPTIONS="-2"
fi
I still get the error. What gives? Have I put the -r (accept remote
connections) in the wrong place?
2) "/etc/screen.d/startx line 1 LOCAL command not found"
* when set to SCREEN_0 = STARTX the terminal hangs on the sort of
herringbone pattern that RedHat uses.
* If I set to RUNLEVEL = 3 then the screen messages stop with the
syslog error message. I don't get a shell prompt.
I've run ltspcfg and the status option shows everything installed,
enabled and running except that xdcmp isn't enabled or running - it is
installed.
Any ideas?
Thanks
John Clay
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
