On Sat, 21 Feb 2004, Arno Teigseth wrote:
> Hi folks
>
> I just got LTSP 3 set up and running fine. The only problem is the screen
> resolution. I have a Matrox card with a MGA 2164WP chipset, and the only
> resoluthion in will run is 640x480, but I know the screen supports at least
> 800x600. Setting the resolution to 800x600 works fine according to the
> logs, and I can login to the workstation. The screen goes blank (Hor. freq
> out of range / too high).
I usually have better luck telling LTSP the refresh rates, and have it
figure out the best resolution, than telling it the resolution directly.
X_HORZSYNC = 31-55
X_VERTREFRESH = 55-85
I start with conservative values, and raise the upper end until it blanks,
and then drop it a little. I get my resolution usually.
Cheers, Andy!
http://wizzy.org.za/
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
