Hi all, I am trying to set up my DHCP server to boot my clients. The problem is that DHCP doesnt seem to like my network configuration, it refuses to start with the message:
Starting DHCP server startproc: exit status of parent of /usr/sbin/dhcpd: 1 Internet Software Consortium DHCP Server V3.0.1rc9 Copyright 1995-2001 Internet Software Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP Internet Software Consortium DHCP Server V3.0.1rc9 Copyright 1995-2001 Internet Software Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 0 leases to leases file. Interface eth0 matches multiple shared networks Here is my network configuration: eth0 Link encap:Ethernet HWaddr 00:02:B3:BF:B5:A4 inet addr:153.95.169.113 Bcast:153.95.169.255 Mask:255.255.255.0 inet6 addr: fe80::202:b3ff:febf:b5a4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5476 errors:0 dropped:0 overruns:0 frame:0 TX packets:560 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1108550 (1.0 Mb) TX bytes:89591 (87.4 Kb) Interrupt:20 Base address:0xdf00 Memory:feafe000-feafe038 eth0:1 Link encap:Ethernet HWaddr 00:02:B3:BF:B5:A4 inet addr:192.168.0.20 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Base address:0xdf00 Memory:feafe000-feafe038 eth0:2 Link encap:Ethernet HWaddr 00:02:B3:BF:B5:A4 inet addr:192.168.1.20 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Base address:0xdf00 Memory:feafe000-feafe038 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:572 errors:0 dropped:0 overruns:0 frame:0 TX packets:572 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:44311 (43.2 Kb) TX bytes:44311 (43.2 Kb) And this is a part of my dhcpd.conf: =================================== allow booting; allow bootp; ddns-update-style ad-hoc; option broadcast-address 192.168.0.255; subnet 192.168.0.0 netmask 255.255.255.0{ } subnet 192.168.1.0 netmask 255.255.255.0{ } subnet 153.95.169.0 netmask 255.255.255.0{ } group { next-server 192.168.0.20; filename"/tftpboot/pxelinux.0"; host aww1.fds { hardware ethernet 00:0C:6E:89:D2:1B; fixed-address 192.168.0.21; option root-path "/netclients/clients_astr/192.168.0.21"; } ..... ========================================== Everything is working fine if I use only one of the subnets, but I need all three of them ... How can I get this working ? Best Regards, Marco Schwarz ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
