On Thu, 2004-03-18 at 01:33, Ken Godee wrote: [huge snip] > > I would think cat /dev/fd0 > /dev/hda should work > Why are you using hdb?
i have the *.zdsk on an existing primary. so i connect the new hardisk to an IDE cable, boot the pc, and detect the first hard disk with RH8 et al on hda, and the new hardisk on hdb. > Is the drive you're trying to boot primary master? once i'm done i reset the jumper settings and connect it to the workstation as a primary master. > Not secondary slave or something like that? > Most bios boot from MBR on primary master. > Just a thought. > ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
