On Thu, 15 Jul 2004 [EMAIL PROTECTED] wrote:
> Peter,
>
> Is the nsc driver working ok for you ?
Well, Under LTSP 4.0 it freezes randomly, irregularrly about once
a day as I've said before. Actually thats the geode driver. I tried the
nsc driver as a found a web page that said it worked with the chip set.
under 4.0 this had the same results as the auto detected geode driver.
http://www.larwe.com/technical/geode_linux.html
Was where I got the idea that the nsc driver might work.
Strangly since I put
X_DEVICE_OPTION_01 = "NoAccel"
X_DEVICE_OPTION_02 = "NoMTRR"
in my 4.0 lts.conf the freeze seams to have gone down.
I've not got these settings in 4.1 and I have seen a terminal freeze yet
but I've only got one working currently until I'm sure that that is the
more perminate solution.
Peter Childs
>
> If you get a chance, could you try setting
>
> XSERVER = cyrix
>
> That's the Xserver that is supposed to work for that chipset.
I have not tried the cyrix driver, and just have, No Picture what
so ever once X loads on 4.1 and on 4.0 does the same.
>
> It's a patch that I've created for XFree86 and Xorg. It's entirely
> possible that it's my cyrix driver that is causing all the problems.
>
> Athough, I do have about 25 of the J-125's working just fine at a
> customer using the cyrix driver.
>
> Earlier versions of the nsc driver didn't work well on the J-125, so we
> didn't use it.
>
> Jim McQuillan
> [EMAIL PROTECTED]
>
>
> On Thu, 15 Jul 2004, Peter Childs wrote:
>
> >
> > Just put 4.1 Beta on to test. It seams to work fine, mind you I
> > did copy most of my setting over from 4.0. Its does not seam to freeze
> > like 4.0 did with my ST320 Thin clients (only time will tell however).
> > Not using the updated kernel yet but then....
> >
> > Some slight quirks xdm login screen looks slighly strange on the
> > sides. not a major problem really.
> > Oh the XSERVER=auto detects a geode card and the XOrg does not
> > work (driver missing) geode worked fine on XFree but since its the same as
> > nsc anyway thats fine. I guess the database needs updating. This is using
> > ST320 (Jammin 125)
> > Oh and a typo in the manual.... Page 5 Section 1.1 point 26 one of
> > these should read /etc/build_x3_cfg not /etc/build_x4_cfg. I know its
> > minor but.
> > But for a beta its excelent. Keep up the good work. Must get round
> > to writing instructions for Local Apps to use LDAP rather than nis its so
> > much simpler once its done.
> >
> > Peter
> >
> >
> > -------------------------------------------------------
> > This SF.Net email is sponsored by BEA Weblogic Workshop
> > FREE Java Enterprise J2EE developer tools!
> > Get your free copy of BEA WebLogic Workshop 8.1 today.
> > http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
> > _____________________________________________________________________
> > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > For additional LTSP help, try #ltsp channel on irc.freenode.net
> >
>
>
>
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
