Jean, can you show us how you set it up in lts.conf ?
The serial device is compiled as a loadable module. If you don't specify the serial port properly in lts.conf, the module won't get loaded, and you won't have a device node in /dev If you specify the port as: PRINTER_01_DEVICE = /dev/ttyS0 It should automatically load the serial.o module, and the device node should majically appear in /dev Jim McQuillan [EMAIL PROTECTED] On Sun, 2004-08-15 at 22:19, Jean Krebs wrote: > HI, all! > > I'm trying to set up a serial printer in LTSP 4.0. I've set it up in > CUPS and lts.conf, but it's not working. When I try to test it > manually, by dumping something to the serial port directly, I get an > access denied error message. It seems like the serial device files are > missing. > > Can I create them by hand or is there a configuration option I'm > missing? How do I create them if that's the case? > > Thanks, ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
