Have you tried "setterm -blank 0"? Not sure if that will disable the monitor going into power save mode, but it might.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dirk H Bartley Sent: Thursday, September 09, 2004 1:45 PM To: LTSP Discuss Mailing List Subject: [Ltsp-discuss] Power management on terminal Greetings I have workstations that are being used int telnet only mode. There are a couple of them that get used infrequently. If you go up to them, the monitor is usually in powersave mode. It takes about 35 seconds for the monitor to become usable again after pressing a key. Is there a way to have the monitor not go into powersave mode? I have not found a setting in the monitor itself. These are terminals set in telnet only mode. (they do not have an x server running) SCREEN_01 = telnet Dirk ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
