Robert Reppel wrote:
Hi,
not sure what causes this. Bootup hangs after the following messages:
Probing pci nic...
[3c590]utp[*utp*]: disable 'auto select' with DOS util!Ethernet address: 00:A0:24:96:07:D0
selected utp. (default)
Searching for server (DHCP)...
..F?.F?.F?.F?.F?.F?
I'm using Etherboot 5.2.5 off a floppy disk. If I boot TomsRtBt off a floppy on the same box, it works with DHCP just fine, I can see the lease, ping hosts, etc. Same when using the DHCP server to connect from a Windows box. There is no other DHCP server on the network. I'm using LTSP 3.0.
Any help would be greatly appreciated.
Thanks,
Robert
Looks like you are using an existing DHCP server. Did you stop the dhcpd service on the LTSP box? Is the DHCP server setup so it gives out tftp information?
Configure DHCP for the LTSP Terminals
In the DHCP Service /Other DHCP Options tab page
Add the 5 values listed below:
Code Option Name Value(s)
6 Domain Name Server 192.168.10.2
17 Root Path 192.168.10.1:/opt/ltsp/i386
28 Broadcast Address 192.168.10.255
66 TFTP Server Name 192.168.10.1
67 Boot File Name /lts/vmlinuz.ltspIt probably finds a DHCP server (or two) but not one that gives out tftp info.
Peter
--
Any technology distinguishable from foodoo-magic is insufficiently advanced.
Peter Van den Wildenbergh
CriticalControl Solutions Inc. Bow Valley Square II Suite 2400 205 - 5th avenue SW Calgary, AB T2P 2V7
T 403.705.7500 F 403.705.7555
------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
