On Sun, 2004-12-26 at 12:23, Dr. Sichendra Bista wrote: > I have a unique problem with my workstation (ws003, PI 166Mhz with > 24MB RAM). The booting in the ws003 goes fine but get stuck and does > not proceed after the follwoing lines: > > ================================= > Running /linuxrc > Mounting /proc > linuxrc: Installing 8139too driver > modprobe 8139too > /sbin/insmod /lib/modules/2.4.26-ltsp-2/kernel/lib/crc32.o > Using /lib/modules/2.4.26-ltsp-2/kernel/lib/crc32.o > Symbol version prefix '' > /sbin/insmod /lib/modules/2.4.26-ltsp-2/kernel/drivers/net/mii.o > Using /lib/modules/2.4.26-ltsp-2/kernel/drivers/net/mii.o > /sbin/insmod /lib/modules/2.4.26-ltsp-2/kernel/drivers/net/8139too.o > Using /lib/modules/2.4.26-ltsp-2/kernel/drivers/net/8139too.o > 8139too Fast Ethernet driver 0.9.26 > ====================================== [SNIP]
Try to swap the cable of this workstation to another location on the switch, The switches typically use one chip for every 8 lines so if you are plugged in in any outlet from 1-8 then try and plug in outlet 9-16 on the switch. Sometimes a bank of outlets on the switch can be a problem. HTH -- Sudev Barar Learning Linux ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
