Hello all, Having a problem with the 2.4.26-ltsp-2 kernel in LTSP 4.1. My clients have Gigabit Intel cards that use the e1000.o module.
Under the older 2.4.24-ltsp-1 kernel during boot I get : Running dhclient e1000: eth0 NIC link is up 100 Full Duplex Under the new 2.4.26-ltsp-2 kernel during boot I get: Running dhclient on port 67 e1000: eth0 NIC link is up 100 Full Duplex Problem is that the under the old kernel the system will continue on and start normally but under the new kenel the process dies: Error! Dhcpcd Failed And then the old "tried to kill init" message. Obviously the newer kernel isn't getting an address but the question is why? DHCP is obviously working since the old kernel gets an address. Any suggestions what to look at? What does dhcpcd do differently then dhclient does? Pete -- http://www.elbnet.com ELB Internet Service, Inc. Web Design, Computer Consulting, Internet Hosting ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
