On Wed, 2005-01-19 at 05:30, Dan Stromberg wrote: > On one of them, I can't seem to get high resolutions (1280x1024) without > getting weird blank lines - it's almost as though the video is > interlaced, but half the lines aren't being refreshed. This machine has > SiS 550 video. I've tried vesa (which works fine, but at low > resolutions), and I've tried "XSERVER sis", and I've tried "XSERVER > auto".
Some of the earlier SiS cards have problems. I normally change the cards to some other PCI cards with 2mb mem to make clients work happily at 1024x768. Mostly I end up using old S3-Trio's with vesa driver. > On the other, I get lots of dancing horizontal lines. It has NVidia > video. I've tried "XSERVER nv", "XSERVER auto", and "XSERVER vesa". On > this hardware I also want a 1280x1024 resolution if possible. Go to NVidia site and download their driver. See archives for calculating how much vid-ram you will need to run 1280x1024. HTH -- Sudev Barar Learning Linux ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
