At 13:53 14/06/2005 +0800, seekuel _lycos.com wrote:
sir I was setting up LTSP 4.1.0 using Mandrake 10.0 our workstaions are
all identical, evrything wroks fine exept for 1 workstation which was the
bios was updated to newer version. This are the last few lines the
workstation displays:
Running dhcpd on port 67
Mounting root filesystem: /opt/ltsp/i386 from 192.168.0.102
Doing the pivot_root <-- at this point it takes about 1 min. to display
the next line
nfs: server 192.168.0.102 not responding, still trying <-- the massage
stops here and never continue
What could be the cause of this problem? All other Identical(harware)
workstation boot up fine in LTSP and only this workstation is acting this way.
I was just about to suggest you to change the network card, since I've
experienced this as well and changing to 3Com's network card resolved the
problem. But then I noticed that all other workstations has similar
hardware configuration.
Perhaps others can better enlighten you.
Thanks,
Harry
-------------------------------------------------------
This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput
a projector? How fast can you ride your desk chair down the office luge track?
If you want to score the big prize, get to know the little guy.
Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
