Karl,
I've had this issue on two servers and it appears to be a Cups issue,
not an LTSP issue. The systems were running fine under Debian Woody and
the issue started after upgrading to Sarge. Nothing had changed in LTSP.
The resolution for me was finding the correct printer drivers. The
printers (two different HPs) worked fine (that is print jobs came out
looking correct) using several different drivers but it wasn't until I
used the hpijs (or something like that) driver that the disabled problem
went away.
Pete Billson
--
http://www.elbnet.com
ELB Internet Service, Inc.
Web Design, Computer Consulting, Internet Hosting
Karl Zander wrote:
Running LTSP-4.1.
Have problems with some printers attached to terminals going into a
"disabled" state. Using the CUPS command line tools we can enable them
and they start printing right away. But I am not sure how to
troubleshoot why they are going "disabled." It might happen once or
twice a month. We have some HP JetDirect print servers and they work
fine, its only some of the terminals.
Here is a typical setup from lts.conf
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P
All the printers on the terminals are parallel printers.
We have the same problem with another server running LTSP 4.1.1
--Karl
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
