No problem, James,
It is a worry that you are saying words that don't make sense ...
> When you plug in a printer to a thin client parallel port no body says
> anything at all.
You're Vulcan, aren't you...? :-)
I guess it would help to see your lts.conf file.
Ok, this is an excerpt:
#Buchhaltung
[ws040]
SCREEN_01 = shell
X_MOUSE_PROTOCOL = "Microsoft"
X_MOUSE_DEVICE = "/dev/ttyS1"
X_MOUSE_RESOLUTION = 50
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P
#Sekretariat PXE-Boot
[ws041]
# LOCAL_DEVICE_01 = /dev/sda:USB
# HOTPLUG = Y
SCREEN_01 = shell
XSERVER = radeon
X_MODE_0 = 1280x1024
X_HORZSYNC = 24-92
X_VERTREFRESH = 50-160
X4_MODULE_01 = glx
PRINTER_0_DEVICE = /dev/lp0
PRINTER_0_TYPE = P
Client 040 runs perfectly, the new 041 doesn't. Meanwhile I found out
that on 041, when you log in a shell and try access to lp0, it says
"permission denied". Do you have any idea there? (On 040 again this runs
without problems.)
What happens if you print a test file from yast?
Just "nothing", i. e. it waits for you to acknowledge printing. But this
is no wonder, as Yast only sends a standard .ps file to the printer.
Rolf
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today
Register for a JBoss Training Course. Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
