|
Hello, I can start a workstation
but it gets the console of the server. All the service are running But I cannot get the XDMCP
enabled; it is listening on port 177. If I try to start if form
ltspcfg I get the message already running and enabled. ltspcfg
v0.11 The
Linux Terminal Server Project (http://www.LTSP.org) Interface IP Address
Netmask
Network
Broadcast Used eth0
192.168.2.5 255.255.255.0
192.168.2.0 192.168.2.255 <----- Service Installed
Enabled Running Notes dhcpd
Yes
Yes Yes
Version 3 tftpd
Yes
Yes Yes
Has '-s' flag portmapper
Yes
Yes Yes nfs
Yes
Yes Yes xdmcp
Yes
no Yes
xdm, gdm Using: gdm File
Configured Notes /etc/hosts
Yes /etc/hosts.allow
Yes /etc/exports
Yes /opt/ltsp/i386/etc/lts.conf
Yes Configured runlevel:
5 (value of initdefault in
/etc/inittab) Current runlevel:
5 (output of the 'runlevel'
command) Installation dir...: /opt/ltsp Press <enter> to return to the main menu... If I try init 3 I get the right console, Gray with the
big X cursor. But I want the right inlog box Can someone help me? Best Regards, Johan trep. |
