Am Sonntag, den 19.03.2006, 21:52 -0500 schrieb Claude Gélinas agr.: > I want to switch from a 100baseT to 1000baseT card on an ltsp terminal > on FC3 server. > > I've purchase a dlink dge-530T PCI. install it in the slot #1 and > disable the motherboard lan in the bios but nothing work. can't boot via > pxe. Computer keep asking for a boot disk. > > Motherboard is asus p4s800-mx > > what can I do ???
This sounds like a problem with your server config. Please check wether the new Gigabit interface appears with the same name that your old 100M interface had (say, eth0) and wether it has the same IP address. If both is the case, check wether "dhcpd" is running. If not, check wether an additional module needs to be loaded for the gigabit interface to work... that should happen automatically, at least you should configure it so that that module is loaded on server boot. Regards, Anselm ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
