Radek, I'm guessing that the card just isn't listed in the ltsp niclist file that is inside the initramfs. So, it doesn't get auto detected.
The way to fix that is to pass the kernel module that should be used for that card, on the kernel command line. The module you need to use is probably e1000, so you'd need to pass 'NIC=e1000' via the pxelinux config file. Take a look at: http://wiki.ltsp.org/twiki/bin/view/Ltsp/KernelOptions#PXE That should give you a clue where to specify the option. posdrawiam, Jim McQuillan [EMAIL PROTECTED] Rados?aw Bursztynowski wrote: > Hello, > > I use LTSP software 3 years, and I am very satisfied. I migrated my > network from 100 Mb/s to 1000 Mb/s. I bought new Intel PRO/1000 GT > Desktop Adapters and I installed them into my old PCs used as LTSP > terminals (previously I used 3Com 100 Mb/s cards and everything was OK). > > Terminals equipped with Intel PRO/1000 GT Desktop Adapters boot, load > the kernel, but don't start the system - I received the message: > > Error! Could not automatically detect the network card. PCI cards should > be detected automatically. Kernel panic - not syncing: Attempted to kill > init! > > My server LTSP works on Centos 4.2 and this system detects mentioned > above card with no problem. I compared modules used by Centos and LTSP - > they look the same. So I tried to use module from Centos - no success. > > So I compiled module using sources added to Intel PRO/1000 GT Desktop > Adapters. Compiled module works on Centos, on LTSP I receive the same > message about error. > > I tried LTSP 4.1 and 4.2 using kernels: > > LTSP 4.1: 2.4.26-ltsp-3, 2.6.9-ltsp-3 > LTSP 4.2: 2.6.16.1-ltsp-2. > > What can I do to solve this problem? > > Thanks a lot for any help, > > Best regards = pozdrawiam, > Radek > > > > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
