Stefan,
My Epia 5000 (VE5000) has a Trident chipset in it, so I set my lts.conf
to X_SERVER = trident
Also, if it is a Trident chipset, be careful what resolution/colour
depth you set. I couldn't ever get mine above 1152x864 @ 24bit or
1280x1024 @ 16bit.
John
On Fri, 2006-06-16 at 20:37 +0200, Stefan Bellon wrote:
> Jim McQuillan wrote:
> > Are you sure the thin client is actually using that driver?
> >
> > What do you have set in lts.conf, for 'XSERVER' ?
> >
> > Try setting 'XSERVER = via'
> >
> > That should force it to use that driver.
>
> You were quite right, the client was using "auto" server (and I have no
> idea which one it took). But setting that to "via" like you suggested,
> does not work. In fact, after booting when the client starts X, it only
> displays blinking vertical stripes and nothing else. This happend with
> both via drivers (the one supplied with LTSP 4.2 and the one of the
> link from Veli-Matti's mail). The board is a Via Epia Eden with a 533
> MHz Samuel CPU inside. At home I have a Via Epia Eden CL-6000 with a
> 600 MHz Samuel2 CPU inside and I now for sure that this uses the
> via/unichrome driver. Hm.
>
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
