Joshua N Pritikin wrote: > On Wed, Apr 25, 2007 at 06:56:45PM +0700, Donny Christiaan wrote: >> I've used Samsung SyncMaster 591sg >> (http://www.samsung.com/id/products/monitor/crt/591sg.asp) but it can >> not work on my terminal. It goes blank everytime I start the terminal >> but I can go to console mode (shell) using Ctrl+Alt+F2. I thought this >> is frequency problem (IMHO) .. >> >> Samsung SyncMaster 591sg Spec: >> Horizontal 30~55kHz >> Vertical 50~120Hz >> >> What is the best lts.conf should I use so my monitor can operate well. > > No idea. You probably have to experiment. If I have a stubborn monitor > then I use this: > > [old-monitor] > X_HORZSYNC = 29.29-49.31 > X_VERTREFRESH = 59.93-75 > > The numbers are from the VESA spec. I have another config which is even > more conservative which I can look up tomorrow if you want it.
Hi Josh, Thanks for your reply, I'll try this configuration ... If you don't mind, I would like to try your another config.... Best Regards, Donny Christiaan. [EMAIL PROTECTED] ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
