Need some help! The client could not complete the boot to the server and we
are trying to figure out
what the issue is. Anyone out there can look at the message below and give us
some thoughts? Thank you!
ACPI: (supports S0 S1 S2 S3 S4 S5)
Freeing unused kernel memory: 172K freed
Running /linuxrc
Mounting /proc
linuxrc: Installing sk98lin driver
modprobe sk98lin
insmod /lib/modules/2.6.17.8-ltsp-1/kernel/drivers/net/sk98lin/sk98lin.ko
ACPI: PCI Interupt Link [LNKE] enabled at IRQ 5
ACP: PCI Interupt 000:01:04.0[A] -> Link [LNKE] -> CS1 5 (level,low) -> IRQ 5
Eth0: Marvell Yukon 88E8001 Gigabit Ethernet Controller
PrefPort:A RlmtMode:Check Link State
Running dhcpcd on port 67
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
eth0: network connection down
ERROR! dhcpcd failed!
Kernel panic – syncing: Attempted to kill init!
Other info:
Motherboard: Asus P5GZ-MX
Network : Marvell Yukon 88E8001
Yukon PXE v5.16.1.3-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
