Mandag 16 juli 2007 08:51 skrev Rolf-Werner Eilert: > Hi everyone, > > I've got a new server here to be equipped with LTSP. There is a Suse > 10.2 running on this machine. I can log in via X from my terminal to the > old server like from a big client. > > After setting up LTSP 4.2 and copying (from the old server) and editing > (new IPs etc.) all the necessary configuration files (lts.conf, > dhcpd.conf etc.), I found that DHCP receives a request from the clients > but the answer is never received. > > Instead of > > Jun 15 07:06:11 server02 dhcpd: DHCPDISCOVER from 00:e0:4c:07:4a:35 via > eth0 Jun 15 07:06:11 server02 dhcpd: DHCPOFFER on 192.168.10.132 to > 00:e0:4c:07:4a:35 via eth0 > Jun 15 07:06:11 server02 dhcpd: DHCPREQUEST for 192.168.10.132 > (192.168.10.102) from 00:e0:4c:07:4a:35 via eth0 > Jun 15 07:06:11 server02 dhcpd: DHCPACK on 192.168.10.132 to > 00:e0:4c:07:4a:35 via eth0 > > it just does > > Jun 15 07:06:11 server02 dhcpd: DHCPDISCOVER from 00:e0:4c:07:4a:35 via > eth0 Jun 15 07:06:11 server02 dhcpd: DHCPOFFER on 192.168.10.132 to > 00:e0:4c:07:4a:35 via eth0 > > over and over again. The client just says "No IP address" and tries again. > > The firewall is off (I couldn't reach the new server via X otherwise). > > I looked over the configuration but to no avail. All IP numbers and > stuff seem to be correctly set. So, where should I start searching for > any mis-configurations? Maybe there is something weird left from the > firewall? > > Regards > > Rolf > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net
HI Try a new dhcpd.conf file, without anything for LTSP in it. Then see if you can get your machine to work as an ordinay DHCP server. If ok, then work from there. Also, check and make SURE that there are no other DHCP servers in the network (from small printerboxes and the like...) -- ------------------------------------------------------------------------- Med venlig hilsen/Best regards Verner Kjærsgaard ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
