On Sun, 2007-11-18 at 19:06 +0000, Joseph Gregory wrote: > Using Ubuntu (7.10) not Edubuntu but not sure of configuration > differences. > > Server has two NICs (eth0 Wired static IP as LTSP server, eth1 wireless > to router) > > eth0 connected to switch > > Currently not using ltsp.conf at all > > I having installed the client with the --arch i386 switch so I assume > that a 32 bit client has been installed, server is AMD64. > > > Don't quite know where to continue the debugging. It would be really > good to have a step by step list of what happens after DHCP request has > been accepted and IP address assigned to client.
My guess is the problem is with the DHCP setup. What is the "filename" set to in your dhcp.conf file? I believe it should be: "filename "/ltsp/i386/pxelinux.0"; if you built an i386 chroot. and you should have /ltsp/i386/pxelinux.0 in your TFTPBoot directory (/var/lib/tftpboot). If not, use the ltsp-update-kernels command. Hope this helps... ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
