Hi there
I have 4 nodes with this card:
sis900 0x1039,0x0900 SIS900
And I boot using a floppy with the image I got from
http://www.rom-o-matic.net/5.4.3/
But none of this clients will boot, all start normal, receive the IP and do
some stuff
and then show a error which sais something like this
dhcpd failed!
kernel panic not synking attempting to kill inint
I was wondering if it would be due to the NIC or some switch problem.
Unfortunatetly I'm not allowed to open the computers of the lab.
I tried with all the kernels that I have, and all the same:
#filename "/lts/vmlinuz- 2.6.17.8-ltsp-1";
#filename "/lts/vmlinuz-2.6.16.1-ltsp-2";
#filename "/lts/vmlinuz-2.6.17.8-ltsp-1";
filename "/lts/vmlinuz-2.6.20.9-ltsp-1";
Any subjections on how to troubleshot this?
I'm using Centos 5 x86_64 with ltsp-utils-0.25-0
tanks in advance
--
rb3m dijo:
Un buen programador no es uno que se sepa un lenguaje al derecho y al revés,
sino el que sabe resolver un problema y después implementar la solución en
el lenguaje más adecuado.
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
