On Monday 17 March 2008 21:19:26 [EMAIL PROTECTED] wrote: > Or is it possible to setup a not-so-clean ltsp client, which "knows" of > the ip-address of the server. The pc I have in mind for this has a > hard-disk on board so I could well install a portion of the system on > the client to get around the fact that dhcp on the ltsp-server is not > possible - as there's already another dhcp-server in the network.
Yes, using etherboot 5.4.3 on www.rom-o-matic.net, you can configure the server and the boot filename. 2 choices: using USE_STATIC_BOOT_INFO (BOOTP ) using REQUIRE_VCI_ETHERBOOT (DHCP) There are many options to configure and it'll require you to configure the server also. à bientôt, Xavier [EMAIL PROTECTED] 09 54 06 16 26 ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
