I have a strange problem with pxe boot, I hope somebody can help me... I am trying a lenovo 3000 n100 laptop to access our ltsp server through its built-in lan interface (RTL8139/xxx): * I have registered its MAC address into dhcpd.conf and it gets the right IP and network configuration (with this config another client boots without trouble!!! so the "filename" and "next-server" option should be OK... btw. they are given as global) * the dhcp server and tftp/ltsp server are different hosts; * so lenovo gets the ip addresses from the dhcp server. That's OK. * then I get the message in the subject:
Intel UNDI PXE-2.1 (build 082) [IP list] PXE-T01: File not found PXE-EBR: TFTP error - File not fo PXE-M0F: Exiting PXE ROM * The tftp server in pxelinux.cfg has a default linux boot config file. But I am not sure that pxelinux.0 has been loaded at all... (does the "File not found" message mean that PXE ROM does not found the file given in the "filename" option of dhcpd.conf?) * I write it again: when I connect another machine with PXE boot to the same wire and the machine gets the same IP config it boots perfectly! Can the version of PXE ROM cause such irregular behaviour? TIA, -- Zsolt ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
