I've got some nice wide-screen monitors and new DevonIT clients for use in my new LTSP5 setup. If I specify X_MODE_0=1440x900 for these clients, everything works great, with one small exception: When I move the mouse, the screen does a strange flicker.
Changing the refresh rate from '60 Hz' to '75 Hz' in Preferences->Screen Resolution solves the problem and persists across same-user logout/login. Unfortunately, this is a per-user fix instead of a machine-dependent fix. I know GIYF so I found the below two modlines, but they each stretch the screen vertically too far, such that the IP and Options buttons are either half-hidden or completely off the bottom of the screen. X_MODE_0 = 1440x900 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync X_MODE_0 = 1440x900 132.54 1400 1488 1640 1880 900 901 904 940 -HSync +Vsync I've set the X_MODE_0 to just 1440x900, and then logged in to set the refresh manually, and then used xvidtune to get the below modeline, but it also stretches vertically. X_MODE_0 = 1440x900 136.75 1440 1536 1688 1936 900 903 909 942 -HSync +VSync Any ideas how I can accomplish a 75 Hz refresh rate from lts.conf? Regards, Michael ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
