Ok. I figured out wireshark enough to get this captured. The entire log was
4.4 MB, so I didn't think you would want me to attach it. Here is what it
failed on.
So what do I need to do to open this port? Add Port 34523 do my /etc/services
file? (It is not in it.) And what should I name the port? ICMP ? Do I need
to do anything else to open this port?
Does this look like this is the problem so far?
Again, any help will be greatly appreciated.
Frame 8982 (60 bytes on wire, 60 bytes captured)
Ethernet II, Src: Netgear_fe:a7:5d (00:0f:b5:fe:a7:5d), Dst: Netgear_43:0b:9e
(00:0f:b5:43:0b:9e)
Internet Protocol, Src: 192.168.1.250 (192.168.1.250), Dst: 192.168.1.8
(192.168.1.8)
User Datagram Protocol, Src Port: 50531 (50531), Dst Port: 34523 (34523)
Trivial File Transfer Protocol
No. Time Source Destination Protocol Info
8983 124.068817 192.168.1.8 192.168.1.250 ICMP
Destination unreachable (Port unreachable)
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
