I am having limited success with my ubuntu version of LTSP I have a NAT router which includes a DHCP server.
My ltsp server machine has a fixed IP on its wifi connection and includes a dhcp (non authorative). A ports scan on this machine shows ports 2000, 9571 and 9572 all listening. A laptop machine boots fine when I use an ethernet cable into my NAT router but for flexibility I am trying an access point in client mode connected to the laptop's ethernet port. Using this method I get an IP address from the LTSP server's DHCP server, vmlinuz loads, initrd.img loads, I then get the message 'ready' followed by loading, please wait. I then get the line IP-config: eth0, hardware address **********, mtu 1500 DHCP RARP At this point it halts completely. Same laptop connected to router via ethernet cable works, I appreciate this suggests a problem with the wifi setup but the wifi must be correct as vmlinuz and initrd.img loads. This is not an urgent project for me but who knows if I do get it working reliably. Geoff Lane Welwyn Hatfield Computer Club www.whcc.co.uk ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
