On Thu, 2008-10-30 at 17:16 -0700, Vagrant Cascadian wrote: > On Thu, Oct 30, 2008 at 05:17:40PM -0400, bjc wrote: > > Each time I reboot my ltsp-server, ldm refuses to log users into the > > clients. I get the message "this workstation isn't authorized to connect > > to server". > > is the server getting it's primary ip address via dhcp and getting a different > address each time? could you possibly configure your server to get a static > ip > address?
Hi Vagrant, The server and clients do have static ip addresses; my /etc/network/interfaces file is; auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.0.253 netmask 255.255.255.0 gateway 192.168.0.1 up iptables -t nat -A POSTROUTING -o $IFACE -j MASQUERADE auto eth0 iface eth1 inet static address 192.168.1.253 netmask 255.255.255.0 gateway 192.168.0.1 auto eth1 interfaces (END) my /etc/hosts file is; 127.0.0.1 localhost localhost.localdomain localhost localhost c2d.localhost 192.168.1.253 c2d.localhost # The following lines are desirable for IPv6 capable hosts ff02::3 ip6-allhosts ip6-allhosts ## LTSP-begin ## # The lines between 'LTSP-begin' and 'LTSP-end' were added # on: Sun Feb 25 21:51:17 2007, by the ltspcfg configuration tool. # For more information, visit the LTSP homepage # at http://www.LTSP.org 192.168.1.1 ws001.ltsp ws001 192.168.1.2 ws002.ltsp ws002 192.168.1.3 ws003.ltsp ws003 > > Others have mentioned this problem on this list and suggest > > running two commands to fix the situation; ltsp-update-sshkeys followed by > > ltsp-update-image -a i386. This works for me, but only until I reboot my > > server. The situation then starts happening again. > ...snip... > > I'm running ltsp5 in debian lenny on a amd64 server with i386 cliants. > > you should only need to run ltsp-update-sshkeys on Debian (if you're > using NFS, which is the default, NBD doesn't have a mechanism yet to > update individual files without rebuilding the image). ltsp-update-image > updates NBD images. Thats correct, I do only have to run ltsp-update-sshkeys to get the clients to log in. > though, that should happen automatically whenever you bring up your network > interface, if you're configuring your network interfaces in > /etc/network/interfaces. > > live well, > vagrant Thanks for your help ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
