Hello to all, staff need a help.
I have a LTSP server already running at 3 years without problem, buy a few
machines with intel motherboard and network onbord Realtek rtl8111, and I
had to install a new kernel module to support this card, so far so good,
what happens is the following the board of the normal boot, load the module
when it comes time to draw dhcp he calls but can not seem get ip, follows
below the screen of the error.
=================================== ============================
Running /linuxrc
Mounting /proc
Time: tsc clocksource has been installed.
linuxrc: Installing r8169 driver
modprobe r8169
insmod /lib/modules/2.6.20.9-ltsp-1/kernel/drivers/net/r8169.ko
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:03:00;0[A] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
eth0: RTL8168b/8111b at 0xf880e000, 00:1c::c0:d6:cb:ba, IRQ 1
Running dhcpd on port 67
r8169: eth0: link down
r8169: eth0: link down
r8169: eth0: link up
ERRO! dhcpd failed!
Kernel panic - not syncing: Attempted to kill init!
I understand that the above load the driver, now I do not know why he did
not ta get the ip back to load the system, someone can give me a strength in
that. thank you.
------------------------------------------------------------------------------
Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT
is a gathering of tech-side developers & brand creativity professionals. Meet
the minds behind Google Creative Lab, Visual Complexity, Processing, &
iPhoneDevCamp as they present alongside digital heavyweights like Barbarian
Group, R/GA, & Big Spaceship. http://p.sf.net/sfu/creativitycat-com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
