Ok, the fix is to specify the custom xorg shown, but uncomment the
line in Section Device

Option NoAccel "True"

With this change, the GX150 systems all work properly.  For the
GX50/GX110, also need to change the line
       BusID       "PCI:0:2:0"
to
       BusID       "PCI:0:1:0"

Finally, all of this is for the scenario where the LTSP server is a
64bit system and the client is 32bit.  If the LTSP server is 32bit,
then there aren't any issues at all. So, not sure what is different
but it seems to be a timing issue that NoAccel resolves.

Dave ...

On Sat, Aug 28, 2010 at 4:14 PM, David Hopkins <[email protected]> wrote:
> All,
>
> An update.  I booted the system in question using a Live CD for Ubuntu
> (Lucid).  Everything is recognized and works fine.  I then created an
> xorg.conf file via the following from a shell
>
> init 1
> Xorg -configure
>
> I copied this configuration to the LTSP server, added it to the client
> /etc/X11 as xorgGX150.conf
>
> I then modified lts.conf to reference this file.  However, when I boot
> the system, I still get the screen issues where the screen does not
> properly refresh where the mouse is located.  I've include both the
> xorg.conf file and my lts.conf file below as well the section from
> Xorg.7.log that shows that the xorg.conf file is being used.  The
> system is assigned the ip address 192.168.0.21 by dhcp, and knows its
> name (ltsp21) but I used the MAC to assign.
>
> I found an old link that discusses this as well:
> https://bugs.launchpad.net/ubuntu/+source/ltsp/+bug/149006.
>
> At this point, I am at a loss for why I get the issues with the screen
> not refreshing properly.  Any help would be greatly appreciated.
> Because of firewalls, I can't get to the chat channel on freenode
> while at the school.
>
> xorg.conf
> -------------------
> Section "ServerLayout"
>        Identifier     "X.org Configured"
>        Screen      0  "Screen0" 0 0
>        InputDevice    "Mouse0" "CorePointer"
>        InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
>        ModulePath   "/usr/lib/xorg/modules"
>        FontPath     "/usr/share/fonts/X11/misc"
>        FontPath     "/usr/share/fonts/X11/cyrillic"
>        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
>        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
>        FontPath     "/usr/share/fonts/X11/Type1"
>        FontPath     "/usr/share/fonts/X11/100dpi"
>        FontPath     "/usr/share/fonts/X11/75dpi"
>        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
>        FontPath     "built-ins"
> EndSection
>
> Section "Module"
>        Load  "dbe"
>        Load  "dri"
>        Load  "dri2"
>        Load  "extmod"
>        Load  "glx"
>        Load  "record"
> EndSection
>
> Section "InputDevice"
>        Identifier  "Keyboard0"
>        Driver      "kbd"
> EndSection
>
> Section "InputDevice"
>        Identifier  "Mouse0"
>        Driver      "mouse"
>        Option      "Protocol" "auto"
>        Option      "Device" "/dev/input/mice"
>        Option      "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
>        #DisplaySize      300   230     # mm
>        Identifier   "Monitor0"
>        VendorName   "PLN"
>        ModelName    "PLNR PE1500"
>        HorizSync    31.0 - 63.0
>        VertRefresh  56.0 - 75.0
>        Option      "DPMS"
> EndSection
>
> Section "Device"
>        ### Available Driver options are:-
>        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>        ### [arg]: arg optional
>        #Option     "NoAccel"                   # [<bool>]
>        #Option     "SWcursor"                  # [<bool>]
>        #Option     "ColorKey"                  # <i>
>        #Option     "CacheLines"                # <i>
>        #Option     "Dac6Bit"                   # [<bool>]
>        #Option     "DRI"                       # [<bool>]
>        #Option     "NoDDC"                     # [<bool>]
>        #Option     "ShowCache"                 # [<bool>]
>        #Option     "XvMCSurfaces"              # <i>
>        #Option     "PageFlip"                  # [<bool>]
>        Identifier  "Card0"
>        Driver      "intel"
>        VendorName  "Intel Corporation"
>        BoardName   "82815 Chipset Graphics Controller (CGC)"
>        BusID       "PCI:0:2:0"
> EndSection
>
> Section "Screen"
>        Identifier "Screen0"
>        Device     "Card0"
>        Monitor    "Monitor0"
>        SubSection "Display"
>                Viewport   0 0
>                Depth     1
>        EndSubSection
>        SubSection "Display"
>                Viewport   0 0
>                Depth     4
>        EndSubSection
>        SubSection "Display"
>                Viewport   0 0
>                Depth     8
>        EndSubSection
>        SubSection "Display"
>                Viewport   0 0
>                Depth     15
>        EndSubSection
>        SubSection "Display"
>                Viewport   0 0
>                Depth     16
>        EndSubSection
>        SubSection "Display"
>                Viewport   0 0
>                Depth     24
>        EndSubSection
> EndSection
> -------------------
> lts.conf
> -------------------
> [default]
>    LDM_DIRECTX=TRUE
>    SCREEN_07=ldm
>    SCREEN_02=shell
>    X4_MODULE_01=glx
>    X_COLOR_DEPTH=16
>    LOCALDEV=True
>    LOCAL_APPS=True
>    LOCAL_APPS_MENU=True
>    LOCAL_APPS_MENU_ITEMS=gcompris,tuxmath,Pixie
>    SOUND=True
>    NBD_SWAP=True
>    SYSLOG_HOST=server
>    SEARCH_DOMAIN = ncs.k12.de.us
>    DNS_SERVER = 10.179.2.6
>
> [Dell_GX1XX]
>        LIKE               = Default
>        CONFIGURE_X = TRUE
>        XSERVER=intel
>        X_CONF=/etc/X11/xorgGX150.conf
>
> [00:b0:d0:c0:f6:b7]
>      LIKE = DELL_GX1XX
>
> ------------------
> Xorg.7.log
> .Org X Server 1.6.4
> Release Date: 2009-9-27
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
> Current Operating System: Linux ws021 2.6.31-22-generic #63-Ubuntu SMP
> Wed Aug 18 22:54:26 UTC 2010 i686
> Kernel command line: ro initrd=initrd.img quiet splash nbdport=2000
> BOOT_IMAGE=vmlinuz
> Build Date: 06 May 2010  09:30:46PM
> xorg-server 2:1.6.4-2ubuntu4.3 (buildd@)
>        Before reporting problems, check http://wiki.x.org
>        to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
>        (++) from command line, (!!) notice, (II) informational,
>        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.7.log", Time: Sat Aug 28 12:26:54 2010
> (++) Using config file: "/etc/X11/xorgGX150.conf"
> ---------------------------------------------------------------
>
> On Sat, Aug 28, 2010 at 9:37 AM, David Hopkins <[email protected]> wrote:
>> First, I am running Ltsp 5 on Ubuntu Karmic 9.10 and I am having some
>> video issues with the GX110/GX150 systems.  The issue is that the
>> screen does not properly refresh under the mouse cursor.  So, when you
>> pick a drop-down menu, for instance, wherever the mouse scrolls, the
>> text behind the mouse isn't refreshed.  Other than this issue, the
>> systems work flawlessly.  The screen resolution is 1280/x1024, which
>> is what my LCD monitors support. At Ltsp 4.2 these systems worked
>> without issues so they should still work?
>>
>> Does anyone have these systems working without this issue?  Could you
>> send me the xorg.conf file and/or instuctions on how you solved this
>> issue?
>>
>> Thanks!
>> Dave Hopkins
>> Newark Charter School
>> Newark Del 19713
>>
>

------------------------------------------------------------------------------
Sell apps to millions through the Intel(R) Atom(Tm) Developer Program
Be part of this innovative community and reach millions of netbook users 
worldwide. Take advantage of special opportunities to increase revenue and 
speed time-to-market. Join now, and jumpstart your future.
http://p.sf.net/sfu/intel-atom-d2d
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net

Reply via email to