I've discovered that acpid is not installed in the chroot environment.  I'll
install that and see what difference it makes.

Charles Barnwell
[email protected]
07707-910707


On 18 August 2010 08:31, Charles Barnwell <[email protected]> wrote:

> One of the reasons I use LTSP is to reduce power consumption on my
> clients.  I have discovered that a machine I run normally as a thick
> client will use CPU scaling so the majority of the time the machine is
> running at 800 MHz despite having a 2.6 GHz processor.  If I boot this
> machine as an LTSP client this machine always runs at 2.6 GHz, which
> seems to be unnecessary power consumption.
>
> Any deas on how to have full power management on the LTSP thin clients?
>
> Charles Barnwell
> [email protected]
> 07707-910707
>
------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.freenode.net

Reply via email to