Hi,
hmm, I am not succeeding:
meszi@linux-termsrv:~$ lsmod
Module Size Used by
vesafb 13516 1
snd_intel8x0 33455 2
snd_ac97_codec 106082 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80845 2 snd_intel8x0,snd_ac97_codec
snd_seq_midi 13132 0
snd_rawmidi 25424 1 snd_seq_midi
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
snd_timer 28931 2 snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
rfcomm 38139 0
bnep 17830 2
psmouse 86486 0
bluetooth 158438 10 rfcomm,bnep
serio_raw 13027 0
ppdev 12849 0
joydev 17393 0
snd 62064 11
snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc 32114 0
i2c_piix4 13093 0
mac_hid 13077 0
soundcore 14635 1 snd
snd_page_alloc 14108 2 snd_intel8x0,snd_pcm
lp 17455 0
parport 40930 3 ppdev,parport_pc,lp
e1000 101693 0
usbhid 41906 0
hid 77367 1 usbhid
When trying to connect to the LTSP client's IP address with SSH I get...
meszi@linux-termsrv:~$ ssh meszi@192.168.178.41
ssh: connect to host 192.168.178.41 port 22: Connection refused
But the terminal shows up the LTSP server's IP address anyway...
meszi@linux-termsrv:~$ ifconfig eth0
eth0 Link encap:Ethernet Hardware Adresse 08:00:27:43:4d:5f
inet Adresse:192.168.178.240 Bcast:192.168.178.255
Maske:255.255.255.0
inet6-Adresse: fe80::a00:27ff:fe43:4d5f/64
Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
RX packets:29422008 errors:0 dropped:0 overruns:0 frame:0
TX packets:138424645 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX-Bytes:3042127966 (3.0 GB) TX-Bytes:80183941 (80.1 MB)
How can I gain SSH access? :-/
CU,
Daniel.
2012/10/21 James McQuillan <j...@mcquil.com>
> Get to the console of the thin client, or configure sshd to allow you to
> ssh into the thin client from the server.
> Once you have a cmd line session on the thin client, you can check to see
> if your modules are loaded with lsmod, or see if dmesg shows that it
> detected your drive and also you can see what the device name is.
> Also, you can run fdisk on the device to see if there's a partition table.
>
> Jim McQuillan
> j...@ltsp.org
>
> On Sun, Oct 21, 2012 at 3:22 PM, Daniel Brockmann <s...@meszi.de> wrote:
>
>> Hi,
>>
>> I set up a LTSP server for the first time and it works so far: I can log
>> on, I can change lts.conf settings and see the change after rebooting.
>>
>> But one thing would not work on my thin client (Winestra 4210): I cannot
>> access the local CF-card-driven IDE hard drive. USB thumbdrives work well
>> so far. The CF/IDE HDD was formated with two FAT 16 partitions using a live
>> Ubuntu system - so it's proven that it is working at all, at least.
>>
>> Here's the lts.conf :
>>
>> ---
>> # Defines a maximum of 80% of the RAM for X
>> X_RAMPERC = 80
>>
>> # Enables access to locally connected storage devices
>> MODULE_01 = "ide_generic"
>> MODULE_02 = "ide_disk"
>> MODULE_03 = "fuse"
>> MODULE_04 = "usbcore"
>> MODULE_05 = "usb-uhci"
>> MODULE_06 = "usb-storage"
>> MODULE_07 = "sd_mod"
>> LOCALDEV = true
>> HOTPLUG = y
>> LOCAL_STORAGE = y
>> ALLOW_UNKNOWN_USB = y
>> LOCAL_DEVICE_01 = /dev/hda:hda
>> LOCAL_DEVICE_02 = /dev/hdb:hdb
>> LOCAL_DEVICE_03 = /dev/hdc:hdc
>> LOCAL_DEVICE_04 = /dev/hdd:hdd
>> LOCAL_DEVICE_05 = /dev/sda:sda
>> LOCAL_DEVICE_06 = /dev/sdb:sdb
>> LOCAL_DEVICE_07 = /dev/sdc:sdc
>> LOCAL_DEVICE_08 = /dev/sdd:sdd
>> ---
>>
>> What am I doing wrong?
>>
>> CU,
>> Daniel.
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Everyone hates slow websites. So do we.
>> Make your web apps faster with AppDynamics
>> Download AppDynamics Lite for free today:
>> http://p.sf.net/sfu/appdyn_sfd2d_oct
>> _____________________________________________________________________
>> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
>> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
>> For additional LTSP help, try #ltsp channel on irc.freenode.net
>>
>>
>
>
> ------------------------------------------------------------------------------
> Everyone hates slow websites. So do we.
> Make your web apps faster with AppDynamics
> Download AppDynamics Lite for free today:
> http://p.sf.net/sfu/appdyn_sfd2d_oct
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.freenode.net
>
>
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
