On 2015-01-08, Funke, Martin wrote: > i tried these setting but they dont work. My test user always have a volume > of 33%.
What did you try exactly? What are the channels available to your client's sound card: amixer --card=1 scontrols Simple mixer control 'Master',0 Simple mixer control 'Headphone',0 Simple mixer control 'Speaker',0 Simple mixer control 'PCM',0 Simple mixer control 'Mic',0 Simple mixer control 'Mic Boost',0 Simple mixer control 'Beep',0 Simple mixer control 'Capture',0 Simple mixer control 'Auto-Mute Mode',0 Simple mixer control 'Internal Mic',0 Simple mixer control 'Internal Mic Boost',0 So, the corresponding lts.conf values would be MASTER_VOLUME, HEADPHONE_VOLUME, SPEAKER_VOLUME, etc. Some of them are not strictly volume controls. You might be able to decipher the output of "amixer --card=1 scontents" to get more information. It may have multiple sound cards. You may need to try this for each card, "amixer --card=0 scontents", --card=2, etc. Although I'm noticing the code doesn't handle different volume settings for each card... I've also been experiencing unusual results with setting the volume with some quick experimentation on Debian Jessie... Setting VOLUME=30 gets me 14% speaker volume, VOLUME=90 gets 96%, VOLUME=200 or VOLUME=120 gets 100%, VOLUME=20 gets 10% ... so apparently soemthing is amiss, but it is possible to adjust the volume. So I would suggest adjusting the VOLUME= above 100 to see if you can't get the volume setting you want... live well, vagrant > -----Ursprüngliche Nachricht----- > Von: Vagrant Cascadian [mailto:vagr...@debian.org] > Gesendet: Montag, 15. Dezember 2014 19:08 > An: Funke, Martin; 'LTSP (ltsp-discuss@lists.sourceforge.net)' > Betreff: Re: [Ltsp-discuss] LTSP Soundsetting > > On 2014-12-15, Funke, Martin wrote: >> Xubuntu 14.04 + LTSP 5.5.1 >> >> i would like to start a rdp session instead of ldm. So in lts.conf I >> changed SCREEN_07 from ldm to rdesktop. >> >> So far its working but there is a little problem. The sound settings >> are not loud enough. >> >> Is there a way to tell the client to start at a 100% sound volume or >> even a 200% one? > > apt-get install ltsp-docs > > man lts.conf > > Look at the section "SOUND AND VOLUME CONTROL PARAMETERS". > > I'll note that arbitrary variable names depending on your sound card may be > needed, if it doesn't implement the "standard" types documented there. > Essentially setting XYZ_VOLUME will set the volume control for the XYZ > channel. > > I think 100% is the max. > > > live well, > vagrant
signature.asc
Description: PGP signature
------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
