Thanks Mathieu. This was my fault .. I couldn't apply your patch (kept getting failures on hunks 2-8 for some reason) so I hand patched the file and in doing so, transposed a rcu unlock with an rcu lock (just as you suspected). So, after correcting that, all is well and I'm able to perform tracing under 2.6.33.2 RT.
Thanks Much! JP -----Original Message----- From: Mathieu Desnoyers [mailto:[email protected]] Sent: Thu 5/13/2010 2:23 PM To: John P. Paul Cc: [email protected]; [email protected]; [email protected] Subject: Re: [ltt-dev] lttctl locks up with RT Linux Please double-check that you applied the last patch correctly. I tried building a lttng-enabled -rt tree here (x86 64 box), and it works (I can start/stop tracing and see the trace in lttv). Note that I simply discarded the conflicting instrumentation patches for this quick test. I'm pretty sure an error could have been inserted in async_wakeup() within ltt-tracer.c. Can you paste the code you have ? Unbalanced rcu read lock/unlock could be causing this. Thanks, Mathieu * [email protected] ([email protected]) wrote: > Turning off CONFIG_RCU_CPU_STALL_DETECTOR does not solve the issue with > starting up "lttctl -C" ... that call never returns. I'm no longer getting > the stack dumps in /var/log/messages and I still have to hard reboot the > system as soft reboot doesn't work. > > JP -- This is an e-mail from General Dynamics Robotic Systems. It is for the intended recipient only and may contain confidential and privileged information. No one else may read, print, store, copy, forward or act in reliance on it or its attachments. If you are not the intended recipient, please return this message to the sender and delete the message and any attachments from your computer. Your cooperation is appreciated. _______________________________________________ ltt-dev mailing list [email protected] http://lists.casi.polymtl.ca/cgi-bin/mailman/listinfo/ltt-dev
