I have a Zaurus SL5500, I hope someone can help me with the wireless problem. It's on Sharp ROM 2.38 now, has been on OpenZaurus 3.0(didn't work either), NIC is Linksys WCF11 (Compatflash wireless card) 64MB of RAM
I can't get it to connect to the Linksys WAP11 AP as open system or WEP, either with Linksys WCF11 or Netgear MA701 card, but I can get it to work with ad-hoc mode (128bit WEP) to my laptop, Kismet works find also, I can pickup a few AP around my area. I checked/edit /etc/pcmcia/wlan-ng.opts, config, wireless.opts and /etc/sq_wlancfg.conf, none of it helps. The interface came up with out a problem, I can ping it, but it gave me "p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped" when ping outside of it's interface, this didn't happen when it's in Ad-hoc mode. Below are captures from dmesg. netproto_create: INDEX 0 init_module: prism2_cs.o: 0.1.12-shp Loaded init_module: dev_info is: prism2_cs prism2_cs: index 0x01: Vcc 3.3, irq 35, io 0xf6000000-0xf600003f hfa384x_corereset: hfa384x_corereset not supported on pcmcia. Use driver services COR access function instead ident: nic h/w: id=0x800c 1.0.0 ident: pri f/w: id=0x15 1.0.5 ident: sta f/w: id=0x1f 1.3.4 MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1 CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1 PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/3 STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9 PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1 STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1 Prism2 card SN: 99SA01000000 p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped. p80211knetdev_hard_start_xmit: Tx attempt prior to association, frame dropped. Zaurus OS: Linux localhost 2.4.6-rmk1-np2-embedix #1 2002ǯ 7·î22Æü(·î) 09»þ53ʬ12Éà JST armv4l unknown
