On Friday 28 September 2001 09:43, you wrote:
> ilian wrote:
> > njakoi moge li da mi kage kak sled kato instalna qmail-a
> > da nakaram programi kato pine i kmail da rabotjat s nego.
> > ilia puk da mi kage njakoe mestence ot kadeto da namerja
> > info kak da gi nakaram da zarabotjat.no da ne sa na english
> > neshto sam skaran s tozi ezik malko ako moge da e na bulgarski
>
> ----------------------------------------------
> 6.2. How do I make pine work with qmail?
>
> Answer: Put
>
> sendmail-path=/usr/lib/sendmail -oem -oi -t
>
> into /usr/local/lib/pine.conf. (This will work with sendmail too.)
> Beware that pine is neither secure nor reliable.
> ----------------------------------------------
>
> Preporychwam ti da polzwash ./Maildir/ formata
> i "mutt".
>
>
> Pozdrawi!
megdu drugoto az polzvam Slackware-8.0 kernel-2.4.5
pine.conf e na malko po razli4no mjasto no go namerih.
kakto i da e.pra6tam ti go za da vidi6 kakvo sum napravil v nego.
sigurno 6te imam i drugi vuprosi no zasega ne se se6tam drugo
# /usr/lib/pine/pine.conf -- system wide pine configuration
#
# Values here affect all pine users unless they've overidden the values
# in their .pinerc files. A copy of this file with current comments may
# be obtained by running "pine -conf". It will be printed to standard output.
#
# For a variable to be unset its value must be null/blank. This is not the
# same as the value of "empty string", which can be used to effectively
# "unset" a variable that has a default or previously assigned value.
# To set a variable to the empty string its value should be "".
# Switch variables are set to either "yes" or "no", and default to "no".
# Except for feature-list items, which are additive, values set in the
# .pinerc file replace those in pine.conf, and those in pine.conf.fixed
# over-ride all others. Features can be over-ridden in .pinerc or
# pine.conf.fixed by pre-pending the feature name with "no-".
#
# (These comments are automatically inserted.)
# Over-rides your full name from Unix password file. Required for PC-Pine.
personal-name=
# Sets domain part of From: and local addresses in outgoing mail.
user-domain=
# List of SMTP servers for sending mail. If blank: Unix Pine uses sendmail.
smtp-server=
# NNTP server for posting news. Also sets news-collections for news reading.
nntp-server=
# Path of (local or remote) INBOX, e.g. ={mail.somewhere.edu}inbox
# Normal Unix default is the local INBOX (usually /usr/spool/mail/$USER).
inbox-path=
# List of folder pairs; the first indicates a folder to archive, and the
# second indicates the folder read messages in the first should
# be moved to.
incoming-archive-folders=
# List of context and folder pairs, delimited by a space, to be offered for
# pruning each month. For example: {host1}mail/[] mumble
pruned-folders=
# Over-rides default path for sent-mail folder, e.g. =old-mail (using first
# folder collection dir) or ={host2}sent-mail or ="" (to suppress saving).
# Default: sent-mail (Unix) or SENTMAIL.MTX (PC) in default folder collection.
default-fcc=
# Over-rides default path for saved-msg folder, e.g. =saved-messages (using 1st
# folder collection dir) or ={host2}saved-mail or ="" (to suppress saving).
# Default: saved-messages (Unix) or SAVEMAIL.MTX (PC) in default collection.
default-saved-msg-folder=
# Over-rides default path for postponed messages folder, e.g. =pm (which uses
# first folder collection dir) or ={host4}pm (using home dir on host4).
# Default: postponed-msgs (Unix) or POSTPOND.MTX (PC) in default fldr coltn.
postponed-folder=
# If set, specifies where already-read messages will be moved upon quitting.
read-message-folder=
# If set, specifies where form letters should be stored.
form-letter-folder=
# Contains the actual signature contents as opposed to the signature filename.
# If defined, this overrides the signature-file. Default is undefined.
literal-signature=
# Over-rides default path for signature file. Default is ~/.signature
signature-file=
# List of features; see Pine's Setup/options menu for the current set.
# e.g. feature-list= select-without-confirm, signature-at-bottom
# Default condition for all of the features is no-.
feature-list=
# Pine executes these keys upon startup (e.g. to view msg 13: i,j,1,3,CR,v)
initial-keystroke-list=
# Only show these headers (by default) when composing messages
default-composer-hdrs=
# Add these customized headers (and possible default values) when composing
customized-hdrs=
# When viewing messages, include this list of headers
viewer-hdrs=
# Determines default folder name for Saves...
# Choices: default-folder, by-sender, by-from, by-recipient, last-folder-used.
# Default: "default-folder", i.e. "saved-messages" (Unix) or "SAVEMAIL" (PC).
saved-msg-name-rule=
# Determines default name for Fcc...
# Choices: default-fcc, by-recipient, last-fcc-used.
# Default: "default-fcc" (see also "default-fcc=" variable.)
fcc-name-rule=
# Sets presentation order of messages in Index. Choices:
# subject, from, arrival, date, size. Default: "arrival".
sort-key=
# Sets presentation order of address book entries. Choices: dont-sort,
# fullname-with-lists-last, fullname, nickname-with-lists-last, nickname
# Default: "fullname-with-lists-last".
addrbook-sort-rule=
# Sets presentation order of folder list entries. Choices: ,
#
# Default: "alpha-with-directories-last".
folder-sort-rule=
# Sets the default folder and collectionoffered at the Goto Command's prompt.
goto-default-rule=
# Sets message which cursor begins on. Choices: first-unseen, first-recent,
# first-important, first-important-or-unseen, first-important-or-recent,
# first, last. Default: "first-unseen".
incoming-startup-rule=
# Allows a default answer for the prune folder questions. Choices: yes-ask,
# yes-no, no-ask, no-no, ask-ask, ask-no. Default: "ask-ask".
pruning-rule=
# Reflects capabilities of the display you have. Default: US-ASCII.
# Typical alternatives include ISO-8859-x, (x is a number between 1 and 9).
character-set=
# Specifies the program invoked by ^_ in the Composer,
# or the "enable-alternate-editor-implicitly" feature.
editor=
# Specifies the program invoked by ^T in the Composer.
speller=
# Specifies the column of the screen where the composer should wrap.
composer-wrap-column=
# Specifies the string to insert when replying to a message.
reply-indent-string=
# Specifies the introduction to insert when replying to a message.
reply-leadin=
# Specifies the string to use when sending a message with no to or cc.
empty-header-message=
# Program to view images (e.g. GIF or TIFF attachments).
image-viewer=
# If "user-domain" not set, strips hostname in FROM address. (Unix only)
use-only-domain-name=
# Full name for bug report address used by "Report Bug" command.
# Default: Pine Developers
bugs-fullname=
# Email address used to send bug reports.
# Default: [EMAIL PROTECTED]
bugs-address=
# Program/Script used by "Report Bug" command. No default.
bugs-additional-data=
# Full name for suggestion address used by "Report Bug" command.
# Default: Pine Developers
suggest-fullname=
# Email address used to send suggestions.
# Default: [EMAIL PROTECTED]
suggest-address=
# Full name for "local support" address used by "Report Bug" command.
# Default: Local Support
local-fullname=
# Email address used to send to "local support".
# Default: postmaster
local-address=
# Force these address book entries into all writable personal address books.
# Syntax is forced-abook-entry=nickname|fullname|address
# This is a comma-separated list of entries, each with syntax above.
# Existing entries with same nickname are not replaced.
# Example: help|Help Desk|[EMAIL PROTECTED]
forced-abook-entry=
# This is a number between 1 and 5. It is the number of times a user will
# have to enter a password when they run the keyboard lock command in the
# main menu. Default is 1.
kblock-passwd-count=
# This variable takes a list of programs that message text is piped into
# after MIME decoding, prior to display.
display-filters=
# This defines a program that message text is piped into before MIME
# encoding, prior to sending
sending-filters=
# A list of alternate addresses the user is known by
alt-addresses=
# This is a list of formats for address books. Each entry in the list is made
# up of space-delimited tokens telling which fields are displayed and in
# which order. See help text
addressbook-formats=
# This gives a format for displaying the index. It is made
# up of space-delimited tokens telling which fields are displayed and in
# which order. See help text
index-format=
# The number of lines of overlap when scrolling through message text
viewer-overlap=
# Number of lines from top and bottom of screen where single
# line scrolling occurs.
scroll-margin=
# The number of seconds to sleep after writing a status message
status-message-delay=
# The approximate number of seconds between checks for new mail
mail-check-interval=
# Full path and name of NEWSRC file
newsrc-path=
# Path and filename of news configation's active file.
# The default is typically "/usr/lib/news/active".
news-active-file-path=
# Directory containing system's news data.
# The default is typically "/usr/spool/news"
news-spool-directory=
# Path and filename of the program used to upload text from your terminal
# emulator's into Pine's composer.
upload-command=
# Text sent to terminal emulator prior to invoking the program defined by
# the upload-command variable.
# Note: _FILE_ will be replaced with the temporary file used in the upload.
upload-command-prefix=
# Path and filename of the program used to download text via your terminal
# emulator from Pine's export and save commands.
download-command=
# Text sent to terminal emulator prior to invoking the program defined by
# the download-command variable.
# Note: _FILE_ will be replaced with the temporary file used in the downlaod.
download-command-prefix=
# Sets the search path for the mailcap configuration file.
# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2.
mailcap-search-path=
# Sets the search path for the mimetypes configuration file.
# NOTE: colon delimited under UNIX, semi-colon delimited under DOS/Windows/OS2.
mimetype-search-path=
# List of programs to open Internet URLs (e.g. http or ftp references).
url-viewers=
# List of incoming msg folders besides INBOX, e.g. ={host2}inbox, {host3}inbox
# Syntax: optnl-label {optnl-imap-host-name}folder-path
incoming-folders=
# Pine compares this value with the first folder collection directory.
# If they match (or no folder collections are defined), and the directory
# does not exist, Pine will create and use it. Default: ~/mail
mail-directory=/Maildir/new
# List of directories where saved-message folders may be. First one is
# the default for Saves. Example: Main {host1}mail/[], Desktop mail\[]
# Syntax: optnl-label {optnl-imap-hostname}optnl-directory-path[]
folder-collections=
# List, only needed if nntp-server not set, or news is on a different host
# than used for NNTP posting. Examples: News *[] or News *{host3/nntp}[]
# Syntax: optnl-label *{news-host/protocol}[]
news-collections=
# List of file or path names for personal addressbook(s).
# Default: ~/.addressbook (Unix) or \PINE\ADDRBOOK (PC)
# Syntax: optnl-label path-name
address-book=
# List of file or path names for global/shared addressbook(s).
# Default: none
# Syntax: optnl-label path-name
global-address-book=
# The system wide standard printers
standard-printer=
# This names the path to an alternative program, and any necessary arguments,
# to be used in posting mail messages. Example:
# /usr/lib/sendmail -oem -t -oi
# or,
# /usr/local/bin/sendit.sh
# The latter a script found in Pine distribution's contrib/util directory.
# NOTE: The program MUST read the message to be posted on standard input,
# AND operate in the style of sendmail's "-t" option.
sendmail-path=/usr/lib/sendmail-oem - oi -t
# This names the root of the tree to which the user is restricted when reading
# and writing folders and files. For example, on Unix ~/work confines the
# user to the subtree beginning with their work subdirectory.
# (Note: this alone is not sufficient for preventing access. You will also
# need to restrict shell access and so on, see Pine Technical Notes.)
# Default: not set (so no restriction)
operating-dir=
# If no user input for this many hours, Pine will exit if in an idle loop
# waiting for a new command. If set to zero (the default), then there will
# be no timeout.
user-input-timeout=
# Sets the time in seconds that Pine will attempt to open a network
# connection. The default is 30, the minimum is 5, and the maximum is
# system defined (typically 75).
tcp-open-timeout=
# Network read warning timeout. The default is 15, the minimum is 5, and the
# maximum is 1000.
tcp-read-warning-timeout=
# Network write warning timeout. The default is 0 (unset), the minimum
# is 5 (if not 0), and the maximum is 1000.
tcp-write-warning-timeout=
# If this much time has elapsed at the time of a tcp read or write
# timeout, pine will ask if you want to break the connection.
# Default is 60 seconds, minimum is 5, maximum is 1000.
tcp-query-timeout=
# Sets the format of the command used to open a UNIX remote
# shell connection. The default is "%s %s -l %s exec /etc/r%sd"
# NOTE: the 4 (four) "%s" entries MUST exist in the provided command
# where the first is for the command's path, the second is for the
# host to connnect to, the third is for the user to connect as, and the
# fourth is for the connection method (typically "imap")
rsh-command=
# Sets the name of the command used to open a UNIX remote shell connection.
# The default is tyically /usr/ucb/rsh.
rsh-path=
# Sets the time in seconds that Pine will attempt to open a UNIX remote
# shell connection. The default is 15, min is 5, and max is unlimited.
# Zero disables rsh altogether.
rsh-open-timeout=
# Sets the format of the command used to open a UNIX secure
# shell connection. The default is "%s %s -l %s exec /etc/r%sd"
# NOTE: the 4 (four) "%s" entries MUST exist in the provided command
# where the first is for the command's path, the second is for the
# host to connnect to, the third is for the user to connect as, and the
# fourth is for the connection method (typically "imap")
ssh-command=
# Sets the name of the command used to open a UNIX secure shell connection.
# Tyically this is /usr/local/bin/ssh.
ssh-path=
# Sets the time in seconds that Pine will attempt to open a UNIX secure
# shell connection. The default is 15, min is 5, and max is unlimited.
# Zero disables ssh altogether.
ssh-open-timeout=
# Sets the version number Pine will use as a threshold for offering
# its new version message on startup.
new-version-threshold=
# List of mail drivers to disable.
disable-these-drivers=
# List of SASL authenticators to disable.
disable-these-authenticators=
# How many extra copies of remote address book should be kept. Default: 3
remote-abook-history=
# Minimum number of minutes between checks for remote address book changes.
# 0 means never check except when opening a remote address book.
# -1 means never check. Default: 5
remote-abook-validity=
# Your default printer selection
printer=
# List of special print commands
personal-print-command=
# Patterns and their actions are stored here.
patterns-roles=
# Patterns and their actions are stored here.
patterns-filters=
# Patterns and their actions are stored here.
patterns-scores=
# Patterns and their actions are stored here.
patterns-indexcolors=
# Controls display of color
color-style=
# Choose: black, blue, green, cyan, red, magenta, yellow, or white.
normal-foreground-color=
normal-background-color=
reverse-foreground-color=
reverse-background-color=
title-foreground-color=
title-background-color=
status-foreground-color=
status-background-color=
keylabel-foreground-color=
keylabel-background-color=
keyname-foreground-color=
keyname-background-color=
selectable-item-foreground-color=
selectable-item-background-color=
quote1-foreground-color=
quote1-background-color=
quote2-foreground-color=
quote2-background-color=
quote3-foreground-color=
quote3-background-color=
prompt-foreground-color=
prompt-background-color=
index-to-me-foreground-color=
index-to-me-background-color=
index-important-foreground-color=
index-important-background-color=
index-deleted-foreground-color=
index-deleted-background-color=
index-answered-foreground-color=
index-answered-background-color=
index-new-foreground-color=
index-new-background-color=
index-recent-foreground-color=
index-recent-background-color=
index-unseen-foreground-color=
index-unseen-background-color=
# When viewing messages, these are the header colors
viewer-hdr-colors=
