Am 04.08.2024 um 22:10 schrieb Daniel Leidert:

Moin!

> Das ist leider nicht aussagekräftig, um etwas zum Zustand der Platte zu
> sagen. Bitte poste die kompletten SMART-Daten.

root@saphir:~# smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-31-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Intenso SSD Sata ��
Serial Number:    SH202306250413
Firmware Version: W0110A0
User Capacity:    256.060.514.304 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
TRIM Command:     Available
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Aug  5 08:06:53 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x03) Offline data collection activity
                                        is in progress.
                                        Auto Offline Data Collection:
Disabled.
Self-test execution status:      (  37) The self-test routine was
interrupted
                                        by the host with a hard or soft
reset.
Total time to complete Offline
data collection:                (  120) seconds.
Offline data collection
capabilities:                    (0x11) SMART execute Offline immediate.
                                        No Auto Offline data collection
support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                                        entering power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  10) minutes.
SCT capabilities:              (0x0001) SCT Status supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   100   100   050    Old_age   Always
      -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   050    Old_age   Always
      -       0
  9 Power_On_Hours          0x0032   100   100   050    Old_age   Always
      -       7083
 12 Power_Cycle_Count       0x0032   100   100   050    Old_age   Always
      -       7
160 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       0
161 Unknown_Attribute       0x0033   100   100   050    Pre-fail  Always
      -       100
163 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       26
164 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       81539
165 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       302
166 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       1
167 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       52
168 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       5050
169 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       99
175 Program_Fail_Count_Chip 0x0032   100   100   050    Old_age   Always
      -       0
176 Erase_Fail_Count_Chip   0x0032   100   100   050    Old_age   Always
      -       0
177 Wear_Leveling_Count     0x0032   100   100   050    Old_age   Always
      -       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0032   100   100   050    Old_age   Always
      -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   050    Old_age   Always
      -       0
182 Erase_Fail_Count_Total  0x0032   100   100   050    Old_age   Always
      -       0
192 Power-Off_Retract_Count 0x0032   100   100   050    Old_age   Always
      -       6
194 Temperature_Celsius     0x0022   100   100   050    Old_age   Always
      -       45
195 Hardware_ECC_Recovered  0x0032   100   100   050    Old_age   Always
      -       0
196 Reallocated_Event_Count 0x0032   100   100   050    Old_age   Always
      -       0
197 Current_Pending_Sector  0x0032   100   100   050    Old_age   Always
      -       0
198 Offline_Uncorrectable   0x0032   100   100   050    Old_age   Always
      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   050    Old_age   Always
      -       0
232 Available_Reservd_Space 0x0032   100   100   050    Old_age   Always
      -       100
241 Total_LBAs_Written      0x0030   100   100   050    Old_age
Offline      -       201703
242 Total_LBAs_Read         0x0030   100   100   050    Old_age
Offline      -       17141
245 Unknown_Attribute       0x0032   100   100   050    Old_age   Always
      -       106911

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Interrupted (host reset)      50%      7083
    -
# 2  Short offline       Interrupted (host reset)      90%      7077
    -
# 3  Short offline       Interrupted (host reset)      90%      7053
    -
# 4  Extended offline    Interrupted (host reset)      90%      7030
    -
# 5  Short offline       Interrupted (host reset)      90%      7029
    -
# 6  Short offline       Interrupted (host reset)      90%      7005
    -
# 7  Short offline       Interrupted (host reset)      90%      6982
    -
# 8  Short offline       Interrupted (host reset)      90%      6957
    -
# 9  Short offline       Completed without error       00%      6933
    -
#10  Short offline       Completed without error       00%      6909
    -
#11  Short offline       Interrupted (host reset)      90%      6886
    -
#12  Extended offline    Interrupted (host reset)      90%      6863
    -
#13  Short offline       Interrupted (host reset)      90%      6862
    -
#14  Short offline       Interrupted (host reset)      90%      6838
    -
#15  Short offline       Completed without error       00%      6817
    -
#16  Short offline       Completed without error       00%      6793
    -
#17  Short offline       Completed without error       00%      6769
    -
#18  Short offline       Completed without error       00%      6745
    -
#19  Short offline       Completed without error       00%      6721
    -
#20  Extended offline    Completed without error       00%      6698
    -
#21  Short offline       Completed without error       00%      6697
    -

Selective Self-tests/Logging not supported

Eine wichtige Information: das Problem kommt erst seit etwas eine Woche,
als ein Idiot den Server bei Kabel trennen brutal ausgeschaltet hat.
Vorher gab es keine Probleme

> Ggf.:
> https://www.thomas-krenn.com/de/wiki/SATA_exception_Emask_0x0_SAct_0x80_SErr_0x0_action_0x6_frozen

Ich habe weder Ubuntu 20.04 noch einen Supermicro Server...

> Grundsätzlich scheint der Fehler nicht auf eine sterbende Platte
> hinzuweisen, sondern eher auf ein Konfigurationsproblem.

Wenigstens das...
Aber wie kann ein Konfigurationsfehler fast ein Jahr nach der Einbau der
Festplatte passieren, wenn an der Konfiguration der SSD gar nichts
geändert wurde?

Danke
Luca Bertoncello
([email protected])

Antwort per Email an