On 11/3/06, andrew colin <[EMAIL PROTECTED]> wrote:
When you connect with minicom -s and set your device correctly does it
respond with an at command ?
On 11/3/06, Daniel Stern <[EMAIL PROTECTED]> wrote:
>
>
> Joseph,
>
> I have some instructions that were forwarded to Rob Gipman from Reigner
> Battenberg from a previous thread on this subject. See below.
>
> Hope this helps.
>
> Daniel#
>
> -----------------------------------------------------------------------------------------------------------------------
>
> "If you are using a new kernel >=2.6.11, the driver for the usb-serial (from
> Texas Instruments) cable is in the kernel.
>
> These are the instructions I gave someone for how I got it working on SuSE
> 9.1. Should be easy to 'translate' for your distribution:
>
> -------------------------------------------------------------------------------------------------------------------------
>
> 1. Update the hwinfo, udev and mkinitrd packages. You can find them
> here:
> http://ftp.gwdg.de/pub/linux/suse/people/agruen/i386/
>
> 2 Download the 9.3 kernel from
> http://ftp.gwdg.de/pub/suse/i386/9.3/suse/i586/kernel-default-2.6.11.4-20a.i586.r
>
> 3 Create an executable script file called
> /etc/hotplug/usb/ti_usb_3410_5420 (or
> /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug depending on yr
> dist.) and paste the contents of the attached script.
>
> 4 FINALLY. Create a soft link
> ln -s /dev/ttyUSB0 /dev/modem
>
> You're done! Run YaST and configure your modem.
>
>
>
> ----- Original Message -----
>
> ----- Original Message -----
> From: joseph mpora
> To: Linux Users Group Uganda
> Sent: Friday, November 03, 2006 9:33 AM
> Subject: [LUG] MTN CDMA usb modem under linux
>
> Am trying to get the MTN modem working under linux but having lots of
> trouble
>
> After extensive searching on the internet (including the previous threads on
> this list), I have been able to get the cable loaded at ttyUSB0, by
> upgrading the kernel and adding 'options usbserial vendor=0x451
> product=0x3410' to /etc/modules.conf (ubuntu: /etc/modprobe.d/options).
>
> Problem is, when I set wvdial, pppconfig and even minicom to use ttyUSB0 as
> modem port, there seems to be no communication, nothing on the phone screen
> while dialing.
>
> I have tried this phone under windows, it works well (using MTN supplied
> drivers)
>
> Has anyone set this up under linux? Please post your experience.
>
> Cheers, Joseph
>
>
>
> ________________________________
>
>
> _______________________________________________
> LUG mailing list
> [email protected]
> http://kym.net/mailman/listinfo/lug
> %LUG is generously hosted by INFOCOM http://www.infocom.co.ug/
>
> The above comments and data are owned by whoever posted them (including
> attachments if any). The List's Host is not responsible for them in any way.
> ---------------------------------------
>
>
>
>
> _______________________________________________
> LUG mailing list
> [email protected]
> http://kym.net/mailman/listinfo/lug
> %LUG is generously hosted by INFOCOM http://www.infocom.co.ug/
>
> The above comments and data are owned by whoever posted them (including
> attachments if any). The List's Host is not responsible for them in any way.
> ---------------------------------------
>
>
>
>
--
AC KISSA
B.Sc Info Tech
RHCE (804005213917312) | LPIC-1 | LPIC-2 (LPI000074540)
To follow the path, look to the master, follow the master, walk with
the master, see through the master, become the master. (zen)
_______________________________________________
LUG mailing list
[email protected]
http://kym.net/mailman/listinfo/lug
%LUG is generously hosted by INFOCOM http://www.infocom.co.ug/
The above comments and data are owned by whoever posted them (including attachments if any). The List's Host is not responsible for them in any way.
---------------------------------------
_______________________________________________ LUG mailing list [email protected] http://kym.net/mailman/listinfo/lug %LUG is generously hosted by INFOCOM http://www.infocom.co.ug/
The above comments and data are owned by whoever posted them (including attachments if any). The List's Host is not responsible for them in any way. ---------------------------------------
