>Yo pude, pero necesitar�a que seas un poco m�s espec�fico, b�sicamente: >- Con qu� script 'autom�gico' labur�s
es el script que me dijiste... speedtouchconf.sh >- Qu� errores tira (si tira alguno) te los debia... aca va en el txt el log de la salida en pantalla... veo que me tira error, que no puede cargar el microcodigo... pero yo lo tengo ahi, en el mismo directorio. los archivos son?: Kqd6_3.012 Zzzl_3.012 alcaudsl.sys slds y gracias! Seba
darthvader:/var/speed/install# ./speedtouchconf.sh ************************************************ * * * speedtouchconf.sh by Steve Parker * * * * http://speedtouchconf.sourceforge.net/ * * based on speedtouch.sourceforge.net project * * * ************************************************ If you have any problems with this script, mail me (steve at steve-parker dot org) with the files /tmp/speedtouch.txt and /var/log/messages for diagnosis. The kernel speedtch module is loaded. This is not compatible with the speedtouch usermode driver. Removing the speedtch module Linux kernel version 2.6 okay. ******************************************* * * * Please select your ISP Settings * * * ******************************************* Country/ISP VPI VCI Belgium, ? 8 35 Denmark, Orang 8 35 France, wanado 8 35 France, ? 8 67 Italy, ? 8 35 Netherlands, ? 8 48 Netherlands 0 35 Poland (NeoStrada) 0 35 UK, Any 0 38 Austria (AON) 8 48 US, BellSouth 8 35 Singapore Pacificnet 0 100 Please type your VPI VCI numbers (eg, 0 38 for UK) 8 35 Please enter your ISP Login ID (eg [EMAIL PROTECTED]) [EMAIL PROTECTED] Please enter your ISP Password 123456 Settings: VPI / VCI : 8 / 35 Login : [EMAIL PROTECTED] Password : 12345678 Are these correct? (Y/N) y No further user interaction is required. Configuring SpeedTouch Driver... Software Configuration - SUCCESS Building SpeedTouch Driver... Software Build - SUCCESS Installing SpeedTouch Driver... Software Installation - SUCCESS Creating ppp files in /etc/ppp You can ignore any insmod hints here... You have a default router : 192.168.1.1 (removing it for you!) *** Configuration finished. Starting the connection *** Wed May 11 23:40:36 ART 2005 The modem lights should start flashing for approx. 60 seconds... You might see some messages about USBDEVFS_BULK failed - you can ignore this. Wed May 11 23:41:16 ART 2005 The modem_run command failed (code 250) modem_run results: Failed to load microcode - this is not a problem if you have already loaded the microcode. The microcode can only be loaded once per system boot; We'll assume that the microcode is already loaded, and not call this an error. You may encounter problems, though. If you get a message to check your password, and your password is definitely correct, switch off the PC, disconnect the modem for a few seconds, re-connect, switch on, remove the speedtch module if it is loaded, and try again. Also check for the presence of /var/run/ppp*pid - remove this file, if found. Running : /usr/sbin/pppd call adsl Called pppd - you should see some messages about IP addresses now... May 11 23:41:26 darthvader pppd[7204]: pppd 2.4.3 started by root, uid 0 May 11 23:41:26 darthvader pppd[7204]: Using interface ppp0 May 11 23:41:26 darthvader pppd[7204]: Connect: ppp0 <--> /dev/pts/2 May 11 23:41:37 darthvader kernel: usb 2-1: bulk timeout on ep7out May 11 23:41:37 darthvader kernel: usb 2-1: usbfs: USBDEVFS_BULK failed ep 0x7 le n 53 ret -110 May 11 23:41:43 darthvader kernel: usb 2-1: bulk timeout on ep7out May 11 23:41:43 darthvader kernel: usb 2-1: usbfs: USBDEVFS_BULK failed ep 0x7 le n 53 ret -110 May 11 23:41:49 darthvader kernel: usb 2-1: bulk timeout on ep7out May 11 23:41:49 darthvader kernel: usb 2-1: usbfs: USBDEVFS_BULK failed ep 0x7 le n 53 ret -110 May 11 23:41:55 darthvader kernel: usb 2-1: bulk timeout on ep7out May 11 23:41:55 darthvader kernel: usb 2-1: usbfs: USBDEVFS_BULK failed ep 0x7 le n 53 ret -110 May 11 23:41:57 darthvader pppd[7204]: LCP: timeout sending Config-Requests May 11 23:41:57 darthvader pppd[7204]: Connection terminated. May 11 23:41:57 darthvader pppd[7204]: Using interface ppp0 May 11 23:41:57 darthvader pppd[7204]: Connect: ppp0 <--> /dev/pts/3 ********************************* * Don't seem to have connected. * ********************************* Please check the username and password in /etc/ppp/*-secrets. Also check the VPI/VCI in /etc/ppp/peers/adsl You could try removing the following files first: /var/run/ppp0.pid Then run /etc/init.d/speedtouch start Current settings: [EMAIL PROTECTED] / 12345678 / 8 / 35
-- Para desuscribirte ten�s que visitar la p�gina https://listas.linux.org.ar/mailman/listinfo/lugar-gral/ /* Publica y encontra trabajo relacionado con softlibre en http://www.linux.org.ar/modules/jobs/ */ Si ten�s alg�n inconveniente o consulta escrib� a mailto:[EMAIL PROTECTED]
