On Mon, 9 Jun 2003 18:30:38 -0300 (ART) "Andr�s D'Elia" <[EMAIL PROTECTED]> wrote:
AD> SI te interesa, yo tengo unos cuantos pdf de Cisco sobre ese modelo. Seg�n la versi�n del AD> SO (del router) se puede "descubrir" cual es la contrase�a de Admin y administrarlo. No AD> recuerdo bien pero no parec�a complicado. Si, no es nada complicado, en la pagina de Cisco esta todo el procedimiento para encontrarla. BTW, Telecom usa "teco" de password. AD> El tema pasa que los de Arnet vienen por defecto configurados para AD> usarse con PPPoE. Pero se que esos bichitos hacen NAT y tienen AD> un servidor DHCP entre otras cosillas. Aca te paso unos datos (no confirmados por mi) de como lograrlo, pero no hace referencia a usar PPPoE sino PPPoA. Se que speedy si vos lo pedis te cambia de PPPoE a PPPoA, ignoro otros proveedores. How do I connect two or more PCs to the Cisco 675? A. Important: Before you attempt this connection, please contact your service provider to verify that they support this scenario. This is not supported by all providers. To connect two or more PCs to the Cisco 675 CPE, you need an external 10BaseT hub. Use a straight-through cable to connect both the Cisco 675 Ethernet port and the PC Ethernet port to the hub. The PC will need to have an IP address to start network connectivity. You can either obtain an IP address for your PC from the Cisco 675 (you'll need to enable DHCP) or from your service provider. To obtain the IP address from the Cisco 675, select the Obtain an IP address automatically option on the TCP/IP properties on your PC and then restart the computer. If you obtain the IP address from your service provider, you'll also need the following information: IP address, subnet mask, gateway, and DNS server address. After you have this information, you can manually configure the TCP/IP properties on the PC. Click OK to save the TCP/IP configuration, and then restart the PC. After the PC has restarted, try to ping the Ethernet address of the Cisco 675. If the ping fails, check the hardware connections and the configuration on both the PC and the Cisco 675. Note: If the Cisco 675 is configured for NAT, the default LAN IP network is 10.0.0.0 and the default subnet mask is 255.255.255.0. You can assign an IP address to your PC starting at 10.0.0.2 with a subnet mask of 255.255.255.0. The default gateway, which is the IP address of the Ethernet on the Cisco 675, is 10.0.0.1. ----------------------------------------------------------------------------------------------------------------------- Q. Where can I find a sample configuration for the Cisco 675 for PPP over ATM with NAT enabled? A. Log in to the console port of the Cisco 675 in privileged mode (see How do I connect to the Cisco 675 via the management port?) and do the following: Type set nvram erase to erase any saved configuration. Type set nvram write and press Enter. Type set ppp wan0-0 login, where login is the username provided by your service provider, and press Enter. Type set ppp wan0-0 password, where password is the password provided by your service provider, and press Enter. Type set ppp wan0-0 ipcp 0.0.0.0, and press Enter. Type set ppp wan0-0 dns 0.0.0.0, and press Enter. Type set ppp wan0-0 sdns 0.0.0.0, and press Enter. Type set nat enable, and press Enter. Type set dhcp server enable, and press Enter. Type write, and press Enter. Type reboot, and press Enter. AD> El tema es que cuando yo averigu� para hacer algo as� (para ahorrarme la PC de gateway), AD> me coment� gente de sistemas de Telecom que la configuraqci�n se administra en forma AD> remota y desist� del intento. Si alguien tiene otra data, avise porque esto es de hace un AD> a�o atr�s. Yo esto no lo alcance a probar, recien consegui esta informacion hace poco, y el cisco se lo devolvi a telecom en febrero cuando me cambie de proveedor. Ojo si alguien lo prueba, con esto BORRAS toda la configuracion de Telecom, asi que siempre acordarse de tenerla a mano en caso de hacer cagadas :-) -- Alejandro Crovetto <[EMAIL PROTECTED]> _______________________________________________ Lugro mailing list [EMAIL PROTECTED] http://www.lugro.org.ar/mailman/listinfo/lugro
