They did not match. They do now and it works. Thank you! Thanks, Bill Pappas - System Integration Engineer - SAN St. Jude Children's Research Hospital 332 North Lauderdale Memphis, TN 38105 Danny Thomas Tower - Room D1010 Mail Stop 312 901-495-4549
-----Original Message----- From: Nathaniel Rutman [mailto:[EMAIL PROTECTED] Sent: Sunday, December 10, 2006 11:44 AM To: Pappas, Bill Cc: [email protected] Subject: Re: [Lustre-devel] Validating Lustre 1.4.7 Install on RHEL 4 AS U4 # ifconfig eth0 | grep inet # hostname # grep `hostname` /etc/hosts must all match, and not be 127.0.0.1 also, # lctl network up # lctl list_nids to make sure /etc/modprobe.conf is good. if it still doesn't start, post the rest of the dmesg. Pappas, Bill wrote: > Hello... > I don't quite understand. > I will tell you this: > The first line of /etc/hosts shows: > 127.0.0.1 localhost localhost.localdomain vfscbe1-stage > > > Should I remove the hostname vfscbe1-stage? > > With the /etc/hosts as is, this is what happens... > > I run llmount.sh as instructed in the manual, /var/log/messages shows > the following after the out from llmount.sh: > > The tail end of the llmount.sh out shows: > . > . > . > MDS mount options: errors=remount-ro,user_xattr,acl, > . > . > . > > The tail end of /var/log/messages shows: > . > . > . > Dec 9 10:07:43 vfscbe1-stage kernel: LDISKFS-fs: mounted filesystem > with ordered data mode. > Dec 9 10:07:43 vfscbe1-stage kernel: Lustre: Changing connection for > OSC_vfscbe1-stage_OST_vfscbe1-stage_mds1 to > vfscbe1-stage_UUID/[EMAIL PROTECTED] > Dec 9 10:07:43 vfscbe1-stage kernel: Lustre: Changing connection for > OSC_vfscbe1-stage_OST_vfscbe1-stage_mds1 to > vfscbe1-stage_UUID/[EMAIL PROTECTED] > . > . > . > > > If I change /etc/hosts to: > 127.0.0.1 localhost localhost.localdomain > > Then the llmount.sh output is the same and /var/log/messages shows: > . > . > . > Dec 9 10:13:55 vfscbe1-stage kernel: Lustre: Changing connection for > OSC_vfscbe1-stage_OST_vfscbe1-stage_mds1 to > vfscbe1-stage_UUID/[EMAIL PROTECTED] > Dec 9 10:13:55 vfscbe1-stage kernel: Lustre: Changing connection for > OSC_vfscbe1-stage_OST_vfscbe1-stage_mds1 to > vfscbe1-stage_UUID/[EMAIL PROTECTED] > . > . > . > > In either case, df does not show a luster fs mounted under /mnt/luster. > Changing the hosts file just seems to change the hostname. > > What would you guess I am doing wrong? > > I appreciate your help. > > Thanks, > Bill Pappas - System Integration Engineer - SAN > St. Jude Children's Research Hospital > 332 North Lauderdale > Memphis, TN 38105 > Danny Thomas Tower - Room D1010 > Mail Stop 312 > 901-495-4549 > > -----Original Message----- > From: Andreas Dilger [mailto:[EMAIL PROTECTED] > Sent: Friday, December 08, 2006 7:02 PM > To: Pappas, Bill > Cc: [email protected] > Subject: Re: [Lustre-devel] Validating Lustre 1.4.7 Install on RHEL 4 AS > U4 > > On Dec 08, 2006 15:52 -0600, Pappas, Bill wrote: > >> Everything seems fine, but the test mount fs does not mount: >> >> loading module: ost srcdir None devdir ost >> loading module: ldiskfs srcdir None devdir ldiskfs >> loading module: fsfilt_ldiskfs srcdir None devdir lvfs >> loading module: obdfilter srcdir None devdir obdfilter >> loading module: mdc srcdir None devdir mdc >> loading module: lov srcdir None devdir lov >> loading module: mds srcdir None devdir mds >> loading module: llite srcdir None devdir llite >> OSD: OST_vfscbe1-stage OST_vfscbe1-stage_UUID obdfilter >> /tmp/ost1-vfscbe1-stage 400000 ldiskfs no 0 256 >> OST mount options: errors=remount-ro >> MDSDEV: mds1 mds1_UUID /tmp/mds1-vfscbe1-stage ldiskfs no >> recording clients for filesystem: FS_fsname_UUID >> Recording log mds1 on mds1 >> LOV: lov_mds1 76557_lov_mds1_2968db066d mds1_UUID 1 1048576 0 0 >> [u'OST_vfscbe1-stage_UUID'] mds1 >> OSC: OSC_vfscbe1-stage_OST_vfscbe1-stage_mds1 >> > 76557_lov_mds1_2968db066d > >> OST_vfscbe1-stage_UUID >> End recording log mds1 on mds1 >> Recording log vfscbe1-stage on mds1 >> Recording log client on mds1 >> MDSDEV: mds1 mds1_UUID /tmp/mds1-vfscbe1-stage ldiskfs 400000 no >> MDS mount options: errors=remount-ro,user_xattr,acl, >> >> The test stops at MDS mount options: errors=remount-ro,user_xattr,acl, >> > . > >> df does not show /mnt/luster as a mount point. >> > > dmesg is your friend. > > First guess is hostname maps to localhost (127.0.0.1) in /etc/hosts. > > > Cheers, Andreas > -- > Andreas Dilger > Principal Software Engineer > Cluster File Systems, Inc. > > > > _______________________________________________ > Lustre-devel mailing list > [email protected] > https://mail.clusterfs.com/mailman/listinfo/lustre-devel > > _______________________________________________ Lustre-devel mailing list [email protected] https://mail.clusterfs.com/mailman/listinfo/lustre-devel
