Hello,
I try to run mgs and mdt on one server. This works fine with one network card
configured as 192.168.0.1. If I set up the second network card (with yast) with
an IP for outgoing traffic (ssh/apache/ftp/etc.) it still works mounting the
mdt (allways with the following 4 commands).
But after a reboot of the server, the mounting fails:
mkfs.lustre --mgs --reformat /dev/sda3
mkfs.lustre --fsname=ffs --mdt --reformat [EMAIL PROTECTED] /dev/sda4
mount -t lustre /dev/sda3 /mnt/mgs
mount -t lustre /dev/sda4 /mnt/mdt
mount.lustre: mount /dev/sda4 at /mnt/mdt failed: Input/output error
Is the MGS running?
If I then deaktivate the network card with the outgoing IP (with yast) it still
does not work. I have to reboot the server then to make the mounting of mdt
working again.
Any ideas?
Friendly greetingMichael Park
_________________________________________________________________
Eva sagt: „Kennst du schon den Adressimport für den Messenger?“
http://messenger.live.de/ersteschritte_adressimport.html
_______________________________________________
Lustre-discuss mailing list
[email protected]
https://mail.clusterfs.com/mailman/listinfo/lustre-discuss
