I had cross compiled lustre-1.6.4.1 for ARM.
The following error is coming while trying to format ost.
I checked all the .ko files generated after building lustre but couldn't
find ldiskfs.ko.
========================================================================
================
armv5l-linux-mkfs.lustre --reformat --fsname=lustre --ost
[EMAIL PROTECTED] /dev/sdb1
Permanent disk data:
Target: lustre-OSTffff
Index: unassigned
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x72
(OST needs_index first_time update )
Persistent mount opts: errors=remount-ro,extents,mballoc
Parameters: [EMAIL PROTECTED]
device size = 784MB
formatting backing filesystem ldiskfs on /dev/sdb1
target name lustre-OSTffff
4k blocks 0
options -I 256 -q -O dir_index -F
mkfs_cmd = mkfs.ext2 -j -b 4096 -L lustre-OSTffff -I 256 -q -O
dir_index -F /dev/sdb1
armv5l-linux-mkfs.lustre: Unable to mount /dev/sdb1: No such device
Is the ldiskfs module available?
armv5l-linux-mkfs.lustre FATAL: failed to write local files
========================================================================
====
While building lustre the following are the errors directed to stdout.
Rest of the output is redirected to a file.
========================================================================
====
configure: WARNING: If you wanted to set the --build type, don't use
--host.
If a cross compiler is detected then cross compile mode will be
used.
configure: line 4448: LC_CONFIG_SPLIT: command not found
configure: line 4449: LC_CONFIG_LDISKFS: command not found
configure: WARNING: Unpatched kernel detected.
configure: WARNING: Lustre servers cannot be built with an unpatched
kernel;
configure: WARNING: disabling server build
configure: WARNING: If you wanted to set the --build type, don't use
--host.
If a cross compiler is detected then cross compile mode will be
used.
configure: WARNING: If you wanted to set the --build type, don't use
--host.
If a cross compiler is detected then cross compile mode will be
used.
configure: error: cannot check for file existence when cross compiling
configure: error: /bin/sh './configure' failed for ldiskfs
========================================================================
====
Thanks,
Venkat
===================================
Venkata Kumar Duvvuru,
Sofware Engineer II, Advanced Development,
LSI Engenio Storage Group,
Bangalore.
Tel : +91-80-41978700 ( Extn : 3544 )
Mob: +91-9880318542
===================================
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian J.
Murrell
Sent: Wednesday, January 09, 2008 7:28 PM
To: lustre-discuss
Subject: Re: [Lustre-discuss] I had installed Lustre but.....
On Wed, 2008-01-09 at 15:08 +0800, Kumar, Venkat wrote:
> Hi,
>
>
>
> I had installed luster-1.5.95
This is a very old beta release. For your own sanity, I'd strongly
suggest you upgrade to something more recent like 1.6.4.1 before banging
your head any more.
b.
_______________________________________________
Lustre-discuss mailing list
[email protected]
https://mail.clusterfs.com/mailman/listinfo/lustre-discuss
