On Mon, Apr 21, 2008 at 9:22 PM, Chris Worley <[EMAIL PROTECTED]> wrote: > The only configuration error on my OSS was: I initially only had > "o2ib0(ib0)" in my modprobe.conf. After unmounting all the OSTs, and > getting the modprobe.conf right: > > options lnet networks=o2ib0(ib0),tcp0(eth0) > > ...and remounting from scratch, both ksocklnd and ko2iblnd are now > loaded properly. > > But, I still can't mount the partition on the ethernet-only client nodes. > > They get the error: > > LustreError: 8439:0:(events.c:401:ptlrpc_uuid_to_peer()) No NID found > for [EMAIL PROTECTED] > LustreError: 8439:0:(client.c:58:ptlrpc_uuid_to_connection()) cannot > find peer [EMAIL PROTECTED] > LustreError: 8439:0:(ldlm_lib.c:312:client_obd_setup()) can't add > initial connection > LustreError: 8439:0:(obd_config.c:325:class_setup()) setup > lfs-OST0026-osc-0000010753919000 failed (-2) > LustreError: 8439:0:(obd_config.c:1062:class_config_llog_handler()) > Err -2 on cfg command: > Lustre: cmd=cf003 0:lfs-OST0026-osc 1:lfs-OST0026_UUID 2:[EMAIL > PROTECTED] > LustreError: 15c-8: [EMAIL PROTECTED]: The configuration from log > 'lfs-client' failed (-2). > > The 36.102.29.4 is the IPoIB address of the added OSS. It shouldn't > want it "@o2ib". > > I've also unmounted all Lustre mounts on the MGS/MDS, unloaded all the > modules and remounted. Still no joy. >
>From this point forward, every time I say"OST" I mean "OSS"... > The file systems were created on the new OST, just as on all the others: > > for i in b c d e f g h i j k l; do mkfs.lustre --ost > --mgsnode="[EMAIL PROTECTED],[EMAIL PROTECTED]" --fsname=lfs --param > sys.timeout=40 --param lov.stripesize=2M /dev/sd$i & done > > The client has the right modprobe.conf, which worked before the additional > OST: > > options lnet networks=tcp0(eth0) > > ... and I'm using the same mount command that worked previously: > > mount -t lustre [EMAIL PROTECTED]:/lfs /lfs > > From the OST I can ping the client: > > # lctl list_nids > [EMAIL PROTECTED] > [EMAIL PROTECTED] > # lctl ping [EMAIL PROTECTED] > [EMAIL PROTECTED] > [EMAIL PROTECTED] > > From the client, I can ping the OST and MDS/MGS: > > # lctl list_nids > [EMAIL PROTECTED] > # lctl ping [EMAIL PROTECTED] > [EMAIL PROTECTED] > [EMAIL PROTECTED] > [EMAIL PROTECTED] > # lctl ping [EMAIL PROTECTED] > [EMAIL PROTECTED] > [EMAIL PROTECTED] > [EMAIL PROTECTED] > > So, somehow, not having the right modprobe.conf the first time I > mounted the partitions on the new OST has made it permanently not want > to mount properly on Ethernet clients (it mounts fine on IB clients). > > Any ideas? > > Thanks, > > Chris > _______________________________________________ Lustre-discuss mailing list [email protected] http://lists.lustre.org/mailman/listinfo/lustre-discuss
