Hi, I am a neophyte trying to benchmark new hardware for a Lustre setup. I got the Lustre IOkit noarch rpm and installed it onto the OSS. I edited the file /usr/bin/sgpdd-survey (attached) to meet the description of our OSS (RAM is 16Gb, sample new hardware detected at /dev/sdg).
My initial running of sgpdd-survey produced the following errors: [EMAIL PROTECTED] ~]# sgpdd-survey Can't find SG device for /dev/sdg1, testing for partition /usr/bin/sgpdd-survey: line 105: CAPACITY trying 0x200: syntax error in expression (error token is "trying 0x200") /usr/bin/sgpdd-survey: line 106: [: ==: unary operator expected Tue Jul 22 14:46:48 EDT 2008 sgpdd-survey on /dev/sdg1 from oss4.crew.local /usr/bin/sgpdd-survey: line 134: rsz*1024/bs: division by 0 (error token is "s") System Info: [EMAIL PROTECTED] ~]# uname -a Linux oss4.crew.local 2.6.18-53.1.13.el5_lustre.1.6.4.3smp #1 SMP Sun Feb 17 08:38:44 EST 2008 x86_64 x86_64 x86_64 GNU/Linux [EMAIL PROTECTED] ~]# cat /etc/redhat-release CentOS release 5 (Final) The physical device is there. I did format it into two 7Tb partitions just to give it an earlier test. Do I have to un-format it for sgpdd-survey? [EMAIL PROTECTED] ~]# parted /dev/sdg GNU Parted 1.8.1 Using /dev/sdg Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: LSI MegaRAID 8888ELP (scsi) Disk /dev/sdg: 14.0TB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 17.4kB 7000GB 7000GB ext3 sdg1 2 7000GB 14.0TB 6986GB ext3 sdg2 (parted) q Information: Don't forget to update /etc/fstab, if necessary. Any advice for testing a new system with sgpdd-survey? Advice appreciated! megan
OSS4.sgpdd-survey.sh
Description: Bourne shell script
_______________________________________________ Lustre-discuss mailing list [email protected] http://lists.lustre.org/mailman/listinfo/lustre-discuss
